Fagor 1FG-2814 User Manual
![Fagor 1FG-2814 Washing Machine manual cover](/images/BrYlSEhdtPfWyjrZZFjHVpzK/thumbs/thumb175x175.webp)
To reset the Fagor 1FG-2814 washing machine, turn off the power by unplugging the machine or switching off the circuit breaker. Wait for about 30 seconds, and then restore power. This should reset the machine's electronics.
Ensure that the door is properly closed and locked. Check that the power cord is plugged in and the circuit breaker is not tripped. Verify that the water supply is turned on. If the issue persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out until it stops, then press the release lever. Rinse the drawer under warm water to remove any detergent residue. Ensure it is completely dry before reinserting it into the machine.
Error code E03 indicates a drainage issue. Check the drain hose for kinks or blockages, and ensure the filter is clean. If the problem continues, the pump may need inspection or replacement.
To maintain the drum, run an empty wash cycle with hot water and vinegar or a drum-cleaning tablet once a month. This helps to remove detergent buildup and prevent mold growth.
Yes, use the delicate or hand wash cycle for delicate fabrics. Ensure to use a mild detergent and avoid overloading the drum to prevent damage to the fabrics.
Ensure the washing machine is level by adjusting the feet. Check that the load is balanced, redistributing clothes if necessary. Excessive vibration can also occur if the machine is overloaded.
Clean the filter every two to three months to prevent blockages. Locate the filter at the bottom front of the machine, remove it, and rinse under running water to remove debris.
Disconnect the power and water supply. Clean and dry the drum and detergent drawer. Leave the door slightly open to prevent mold growth. Store in a dry, climate-controlled environment.
Check that the water supply is turned on and hoses are not kinked or blocked. Ensure the inlet filters are clean. If the issue continues, the water inlet valve may need inspection or replacement.