Doro 6040 Manual
![Doro 6040 Phone manual cover](/images/RSkUlTwbyGyCEbJhGdcFALmL/thumbs/thumb175x175.webp)
To set up your Doro 6040, insert the SIM card and battery, then charge the phone. Turn it on by pressing and holding the red button. Follow the on-screen setup instructions to choose language, date, and time.
Ensure the battery is charged. If not, connect the charger and wait a few minutes before attempting to turn it on again. If it still doesn't work, try a different charger or contact support.
During a call, use the volume buttons on the side of the phone to adjust the call volume. You can also adjust ringtone and alert volumes in the Settings menu under 'Sound & notification'.
Yes, the Doro 6040 supports microSD cards. To insert a memory card, remove the back cover and battery, then insert the card into the designated slot.
You can transfer contacts via Bluetooth from another phone or use a SIM card with saved contacts. To use Bluetooth, ensure it's enabled on both devices and follow the pairing instructions.
Try restarting the phone by removing and reinserting the battery. If the problem persists, perform a factory reset from the phone settings or contact support.
The remaining battery life is displayed in the top-right corner of the screen as an icon. For more detailed information, go to Settings > Battery.
Press and hold the emergency button on the back of the phone. Pre-set emergency contacts will be notified automatically. Ensure the feature is set up in the phone settings under 'Emergency'.
Check for updates by going to Settings > About phone > Software update. Follow the on-screen instructions to download and install any available updates.
Check the charger and cable for any damage. Try using a different power outlet or charger. Ensure the charging port is clean and free from debris. If the problem persists, contact support.