Dodge Charger SRT 2015 User Guide
![Dodge Charger SRT 2015 Sedan manual cover](/images/LuBVFJmiwYeCeYlMdXEOOsPp/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition to "On" without starting the engine. Press the accelerator pedal slowly three times within 10 seconds, then turn the ignition off. Start the engine to ensure the indicator has reset.
The 2015 Dodge Charger SRT typically requires SAE 0W-40 synthetic engine oil for optimal performance and protection.
To improve fuel efficiency, keep tires properly inflated, use recommended oil, drive at moderate speeds, and avoid excessive idling. Regular maintenance such as changing air filters and spark plugs can also help.
The recommended tire pressure for the 2015 Dodge Charger SRT is usually 32 psi for both front and rear tires. Check the owner’s manual or the sticker on the driver’s door jamb for specifics.
To replace the key fob battery, pry open the fob with a small flat tool at the seam. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side faces up. Snap the fob halves back together.
If the check engine light comes on, check for any loose gas caps first. If the light remains, it's advisable to have the vehicle scanned for diagnostic trouble codes at a certified repair shop to determine the issue.
It is recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check it regularly for dirt and debris and replace it if it appears dirty or clogged.
The 2015 Dodge Charger SRT is not designed for towing. It is a performance sedan and lacks a manufacturer-rated towing capacity.
First, check the AC fuse and relay. Ensure the refrigerant level is adequate and inspect the AC compressor and belt for issues. If the problem persists, consult a professional mechanic for a thorough diagnosis.
To update the navigation system, visit the official Dodge website to download the latest map updates to a USB drive. Insert the USB into the vehicle's port and follow the on-screen instructions to complete the update.