Ford Taurus 2019 Owner's Manual
![Ford Taurus 2019 manual cover](/images/mazSLLjZdjEiFmsEJauIpziT/thumbs/thumb175x175.webp)
To reset the oil change light on a 2019 Ford Taurus, turn the ignition on without starting the engine, press the gas and brake pedals simultaneously, and hold them for about 25 seconds until the "Service: Oil Reset Complete" message appears.
The recommended engine oil for a 2019 Ford Taurus is SAE 5W-20, meeting Ford specification WSS-M2C945-A. Always refer to the owner's manual for confirmation.
The 2019 Ford Taurus does not have a dipstick for transmission fluid. Checking or adding fluid should be done by a professional mechanic or at a Ford dealership.
The recommended tire pressure for a 2019 Ford Taurus is typically 35 PSI for all four tires, but always check the sticker inside the driver's door for the exact specifications.
To pair your phone with the SYNC system in a 2019 Ford Taurus, enable Bluetooth on your phone, press the Phone button on the SYNC system, and select Add Device. Follow on-screen instructions and confirm the PIN displayed matches on both devices.
If the battery light comes on, it indicates a problem with the charging system. Check the battery terminals for corrosion, ensure the alternator belt is not broken, and consider having the battery and alternator tested by a professional.
To replace the cabin air filter in a 2019 Ford Taurus, open the glove box, remove the limiting arm, push in on the sides to drop it down, and access the filter cover. Remove the old filter and insert a new one with airflow arrows pointing down.
The 2019 Ford Taurus is not designed for towing, and Ford does not recommend using it for pulling trailers. Always consult your owner's manual for recommendations.
To improve fuel efficiency in your 2019 Ford Taurus, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, avoid aggressive driving, and reduce idling time.
If your key fob stops working, try replacing the battery. Open the fob with a flathead screwdriver, replace the old battery with a new CR2032 battery, and reassemble the fob. If it still doesn't work, reprogramming or replacement might be necessary.