Dodge Challenger SRT 2011 User Guide
![Dodge Challenger SRT 2011 Coupe manual cover](/images/DLaPzLhjVMUSQkxRIHQMJowX/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure all tires are inflated to the recommended pressure. Drive the vehicle above 15 mph for at least 10 minutes. The system should reset automatically.
The recommended oil type is synthetic 0W-40 for optimal performance in all weather conditions. Always refer to the owner's manual for confirmation.
To pair your phone, activate Bluetooth on your phone and in the vehicle's Uconnect system. Select 'Phone' on the Uconnect screen, then follow prompts to add a new device. Enter the provided PIN on your phone to complete pairing.
Common causes include low coolant levels, a malfunctioning thermostat, or a faulty radiator. Regular maintenance and checks can help prevent overheating issues.
Improve fuel efficiency by maintaining proper tire pressure, performing regular maintenance, using the recommended grade of motor oil, and avoiding aggressive driving habits.
The 2011 Dodge Challenger SRT Coupe is not designed for towing. It is recommended to avoid towing with this vehicle to prevent damage.
To replace the cabin air filter, locate the filter housing behind the glove box. Remove the retaining clips, slide out the old filter, and insert a new one, ensuring it is placed correctly according to airflow direction.
If the check engine light comes on, check for any noticeable performance issues. Have the vehicle scanned for error codes to diagnose the problem. It's advisable to consult a professional mechanic for further inspection.
Brake pads should generally be inspected every 10,000 miles and replaced every 20,000-30,000 miles, depending on driving conditions and habits. Always refer to the manufacturer's guidelines for specific recommendations.
To jump-start, connect the positive cable to the positive terminal of the dead battery and the donor battery. Connect the negative cable to the negative terminal of the donor battery and an unpainted metal surface on the dead car. Start the donor vehicle, then the Challenger. Remove cables in reverse order.