Dodge Charger SRT 2014 User Guide
![Dodge Charger SRT 2014 Sedan manual cover](/images/dQTISkUNCblCPfgrOxwuBXfT/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the 'ON' position without starting the engine. Press the accelerator pedal slowly three times within 10 seconds. Turn the ignition off, then start the engine to ensure the reset was successful.
The recommended engine oil for a 2014 Dodge Charger SRT is SAE 0W-40 full synthetic oil. Always refer to the owner's manual for the most accurate information.
To improve fuel efficiency, ensure your tires are properly inflated, perform regular maintenance such as oil changes and air filter replacements, and avoid aggressive driving habits.
A squealing noise when braking could indicate worn brake pads or rotors. It's advisable to inspect the brake system and replace any worn components as necessary.
The 2014 Dodge Charger SRT is not designed for towing. It is recommended to avoid towing with this performance sedan to prevent damage.
It is recommended to rotate the tires every 6,000 to 8,000 miles to ensure even wear and extend tire life.
The recommended tire pressure for the 2014 Dodge Charger SRT is typically 32 PSI for both the front and rear tires. However, always check the placard located on the driver's side door jamb for the most accurate information.
To connect your smartphone to the Bluetooth system, enable Bluetooth on your device. On the car's Uconnect system, select 'Phone' and then 'Add Device'. Follow the on-screen prompts to pair your phone with the vehicle.
If the engine overheats, pull over safely and turn off the engine. Allow it to cool down before checking coolant levels. Refill if necessary and inspect for any leaks. If the problem persists, seek professional assistance.
To replace the cabin air filter, locate the filter housing behind the glove compartment. Remove the glove compartment by releasing the side tabs, then unclip the filter cover and replace the old filter with a new one. Reassemble the glove compartment.