Dimplex Cadiz CDE2ECC Quick Start Guide
![Dimplex Cadiz CDE2ECC Radiator manual cover](/images/iUbAGHFxKouBFAWTtjYWWpmW/thumbs/thumb175x175.webp)
To set the timer, press the 'Timer' button on the control panel. Use the '+' and '-' buttons to adjust the time settings for switching the radiator on and off as per your requirements.
First, ensure that the radiator is plugged in and switched on. Check the thermostat settings and make sure it's set to a temperature higher than the current room temperature. If the issue persists, inspect the fuse or circuit breaker.
Turn off the radiator and unplug it from the wall. Use a soft cloth to wipe down the exterior. Avoid using water or any cleaning agents directly on the unit. Regularly check for dust accumulation in the vents.
Yes, the Dimplex Cadiz CDE2ECC is designed with safety features such as thermal cut-out and a tip-over switch. However, ensure it's set to a safe temperature and is placed away from flammable materials.
Unplug the radiator and leave it for a few minutes. Plug it back in and switch it on. If the problem continues, consult the user manual or contact customer support for further assistance.
It is not recommended to use an extension cord with the radiator, as it may lead to overheating or electrical faults. Always plug the unit directly into a wall socket.
Ensure the radiator is completely cool before storing. Wrap the power cord neatly and store the unit in a dry place, preferably in its original packaging or covered to prevent dust accumulation.
Set the thermostat to a specific temperature and use a room thermometer to verify if the room reaches and maintains that temperature. If there's a discrepancy, the thermostat may need calibration.
The radiator features an electronic climate control system to maintain the desired temperature efficiently. It also includes a timer function to reduce energy usage during off-peak times.
Regularly inspect the power cord and plug for damage. Keep the radiator clean and free from obstructions. Ensure it is placed on a stable surface and never cover the unit while in operation.