Dell Inspiron 5552 Specification Sheet

To perform a factory reset, restart your laptop and press F8 repeatedly to access the Advanced Boot Options. Select 'Repair Your Computer', then choose 'Dell Factory Image Restore' and follow the on-screen instructions.
First, ensure the laptop is charged or connected to a power source. Try a hard reset by removing the battery and AC adapter, holding the power button for 15 seconds, then reconnecting power and attempting to turn it on again.
Power off your laptop and unplug all connections. Remove the back panel by unscrewing the screws, locate the RAM slots, and replace or add RAM modules ensuring they are securely seated.
Turn off the laptop and disconnect power. Use a can of compressed air to blow out debris, and gently wipe the keys with a slightly damp microfiber cloth. Avoid using excessive moisture.
Visit the Dell Support website and download the latest BIOS update for the Inspiron 5552. Run the downloaded file and follow the on-screen instructions, ensuring the laptop remains plugged in throughout the process.
Ensure the vents are not blocked and clean any dust accumulation with compressed air. Consider using a cooling pad and check for software causing high CPU usage. Update your BIOS and drivers for optimal performance.
Use an HDMI cable to connect the laptop to the TV or monitor. Switch to the correct HDMI input on the external display and press 'Windows + P' on the laptop to select a display mode.
Restart your router and laptop. Check if the Wi-Fi is enabled on the laptop and update the wireless drivers. Run the Windows Network Troubleshooter for additional assistance.
Power off the laptop and disconnect it from any power source. Remove the screws securing the back panel, disconnect the battery connector, and remove the old battery. Insert the new battery, reconnect the connector, and replace the back panel.
Yes, you can install an SSD. Power off and unplug the laptop, remove the back panel, and locate the hard drive bay. Remove the existing hard drive, place the SSD in the same position, secure it, and replace the back panel.