Contents

SensorLink
The SensorLink Transmitter (#7610) and SensorLink Receiver (#7611) are designed to work with Da...
Components
- The SensorLink package includes the following. Please make sure you have everything you need bef...
Tools and Materials Needed
- In addition to the components listed above, you may need some of the following tools and material...
Configuring Transmitter/Receiver Pair
- Both the transmitter and receiver have a set of dip switches which enable you to change the ID co...
- Setting the ID Code
  - The wireless weather station may be set to use any of eight selectable ID codes (the default is I...
ID Code
Dip Switch 1
Dip Switch 2
Dip Switch 3
- Silent Operating Mode
  - Dip switch #4 on the receiver allows you to set the console to either stay silent or emit audible...
- Test Mode
- Installation
  - The instructions below will take you through the process required to install the transmitter and ...
  - Choosing a Location for Transmitter and Receiver
    - The range of the radio transmission depends on several factors. Try to position the transmitter a...
  - Installing Transmitter and Receiver
    - Install the transmitter in an attic or garage, or in one of Daviss weatherproof shelters.
  - 1. Remove the cables from your existing junction box.
    - 2. Remove the cover from the transmitter by pushing down on the tabs at the top until you can rem...
    - 3. Attach the base to the mounting surface using the #6 x 1 screws.
    - 4. Insert the sensor cables in the appropriate jacks, as shown below.
    - 5. Gather the sensor cables and secure them to the cable tie lug using a cable tie.
    - 6. Apply power to the transmitter using one of the options indicated below.
    - 7. Test the transmitter by setting dip switch #4 to the Test position, as shown below.
    - 8. Install the receiver into the console base and apply power as shown below.
    - Testing Reception
  - 1. Move dip switch #4 on the receiver to the position opposite its starting position.
    - 2. Check all of the readings on your display to be sure they appear normally (i.e., not dashed o...
    - 3. Once finished testing, return dip switch #4 on the transmitter and receiver to their original ...
    - 4. Reattach the transmitter cover to the base.
    - 5. Reattach the console base.
- Troubleshooting
  - While the Wireless Weather Station is designed to provide years of trouble-free operation, occasi...
- Specifications
  - SensorLink Receiver
    - Receive frequency: 916.5 MHz
  - Update interval
    - Wind speed: 2.5 seconds
  - SensorLink Transmitter
    - Power Input Options
- FCC Part 15 Class B Registration Warning
  - This equipment has been tested and found to comply with the limits for a class B digital device, ...
  - If this equipment does cause harmful interference to radio or television reception, which can be ...
  - Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC reg...

Davis SensorLink 7610 Installation Manual

Davis SensorLink 7610 Transmitter manual cover

Pages 12

Year 0

Language(s)

of 12

Davis SensorLink 7610 Transmitter Specification

The Davis SensorLink 7610 Transmitter is designed to provide high-performance, reliable data transmission for various environmental monitoring applications. This transmitter operates within a frequency range suitable for long-distance communication, ensuring minimal interference and optimal signal integrity. It supports multiple sensor inputs, enabling seamless integration with a wide array of environmental sensors, including temperature, humidity, wind speed, and rainfall sensors. The SensorLink 7610 is equipped with advanced data encoding techniques to enhance data accuracy and reduce transmission errors, making it ideal for applications requiring precise environmental data collection.

The device features a robust, weather-resistant housing that ensures durability and reliable performance in harsh outdoor conditions. This transmitter is powered by an efficient energy management system, supporting both solar and battery power options to provide uninterrupted operation in remote locations. It includes a user-friendly interface for easy configuration and monitoring, with support for both local and remote data access via compatible gateways. The SensorLink 7610 is designed with scalability in mind, allowing for expansion in larger network deployments.

The device's compatibility with standard communication protocols facilitates integration with existing monitoring systems, enhancing its versatility and ease of use. It also offers a comprehensive suite of diagnostic tools for monitoring device health and performance, ensuring consistent data reliability over time. The Davis SensorLink 7610 Transmitter represents a cutting-edge solution for environmental data transmission, combining robust construction, versatile sensor compatibility, and advanced transmission technology.

Davis SensorLink 7610 Transmitter F.A.Q.

How do I set up the Davis SensorLink 7610 Transmitter for the first time?

To set up the Davis SensorLink 7610 Transmitter, first ensure that all components are present and undamaged. Connect the power supply to the transmitter, then follow the instructions in the user manual to pair it with your sensors and configure any necessary settings via the device’s interface.

What should I do if the Davis SensorLink 7610 Transmitter is not turning on?

If the transmitter is not turning on, check the power supply connections and ensure that the power source is functioning. If the device still does not power on, try using a different power adapter or contact customer support for further assistance.

How can I reset the Davis SensorLink 7610 Transmitter to its factory settings?

To reset the transmitter to factory settings, locate the reset button on the device. Press and hold the button for approximately 10 seconds until the indicator lights blink. Release the button and the device will reset.

What is the recommended maintenance schedule for the Davis SensorLink 7610 Transmitter?

It is recommended to perform a maintenance check every 6 months. This includes checking for firmware updates, inspecting the device for physical damage, and ensuring the power connections are secure.

How can I update the firmware on the Davis SensorLink 7610 Transmitter?

To update the firmware, connect the transmitter to your computer via USB or network connection. Download the latest firmware from the Davis website and follow the instructions provided in the update tool to complete the process.

What should I do if the data from the Davis SensorLink 7610 Transmitter is inaccurate?

If the data is inaccurate, first ensure that the sensors are correctly calibrated. Check for any obstructions or interference in the signal path. Review the device settings to ensure they match the sensor specifications.

Can the Davis SensorLink 7610 Transmitter operate in extreme weather conditions?

Yes, the Davis SensorLink 7610 Transmitter is designed to operate in a wide range of weather conditions. However, it is important to ensure the device is installed in a location that protects it from direct exposure to extreme elements.

How do I troubleshoot connectivity issues with the Davis SensorLink 7610 Transmitter?

For connectivity issues, verify the network settings and ensure that the transmitter is within range of the network signal. Restart the device and check for any firmware updates that may address connectivity problems.

What are the power requirements for the Davis SensorLink 7610 Transmitter?

The Davis SensorLink 7610 Transmitter requires a power supply of 12V DC. Ensure that the power adapter used is compatible with these specifications to prevent damage to the device.

How can I extend the range of the Davis SensorLink 7610 Transmitter?

To extend the range, consider using a signal repeater or booster compatible with the transmitter. Additionally, ensure that there are minimal obstructions between the transmitter and the receiving device.