Contents

Solar Power Kit
- For Vantage Weather Stations and Envoy8X
  - Note: A console can be mounted outdoors in a Complete System Shelter (#7724); Weather Envoy or Envoy8X can be mounted outdoors in a Multi-Purpose Shelter (#7728).
- Components
- Tools and Materials Needed for Installation
- Location Tips
  - Note: For information on mounting your console or Envoy in the shelter, refer to your shelter manual.
- Mounting the Solar Power Kit With Vantage Pro2 Stations
  - Sample Installation with Envoy and Tripod
  - Sample Installation With Console and Mounting Pole on a Fence or Post
    - 1. Mount the ISS and desired shelter, if not already mounted.
    - 2. Loosen the screws and saddles that hold the steel tube to the post.
    - 3. Identify where you want to position the solar power kit before you install it. For additional structural support, rest the arm on the lower mounting pole saddle or tripod collar.
    - 4. Attach the brace clamp loosely to the mounting pole and insert the arm.
    - 5. Assemble the brace clamp and loosely fasten it to the mounting pole.
    - 6. While gripping the mounting pole/tripod end of the brace clamp with one hand, slide the arm in as shown below with your other hand and tighten.
    - 7. Position the solar panel so that it can retain the maximum solar exposure.
    - 8. Tighten the brace clamp using a wrench.
    - 9. Re-tighten the screws that hold the mounting pole to the post.
    - 10. Fit the end cap onto the exposed end of the Solar Power Kit arm.
- Connecting the Cables - Cabled Vantage Pro2, Cabled Weather Envoy, Envoy8X
  - 1. If using a Multi-Purpose Shelter, open the shelter by using a flat head screwdriver on the two 10-32 flat head screws. If using a Complete System Shelter, unlatch the two latches on the side of the shelter.
  - 2. Mount the console on the inside of the Complete System Shelter or the Envoy on the inside of the Multi-Purpose Shelter as shown on the following page. If you prefer to mount your console or Envoy elsewhere, see your shelters installation manual...
  - 3. Remove the protective vinyl cap from the power cord plug.
  - 4. Run the power cord from the kit up through one of the shelter openings at the bottom of the Complete System Shelter or Multi-Purpose Shelter.
  - 5. Plug it into the console or Envoys POWER jack. The console (with data logger installed) should beep three times within 10 seconds if the console is working properly. The Weather Envoy or Envoy8X (with data logger installed) should beep twice wi...
  - 6. Check all of the readings on your display to be sure they display correctly. Consult your owners manual for instructions on displaying the various readings. Spin the wind cups, move the wind vane, and tip the rain bucket to verify wind speed an...
  - 7. If everything is working properly, close the Complete System Shelter door and re-latch the latches or close the Multi-Purpose Shelter door and tighten the screws.
  - 8. To avoid wind damage, stuff any extraneous cable length back into the shelter and use the two cable ties provided to strap any exposed cables to the mounting pole (or tripod). You have completed the installation.
- Understanding the Solar Power Kit
  - Note: The battery is sealed, but it should be assumed that it (and any other rechargeable battery) is capable of generating flammable gas. The battery should be located in a vented space, if possible. No spark, flame, or lighted cigarette should be a...
- Troubleshooting Guide
- Contacting Davis Technical Support

Davis 7707 Installation Manual

Pages 8

Year 0

Language(s)

of 8

Davis 7707 Solar Power Kit Specification

The Davis 7707 Solar Power Kit is engineered to provide reliable and efficient power for remote meteorological instrumentation. Designed to be compatible with Davis Instruments' weather stations, this kit ensures continuous operation by harnessing solar energy, making it ideal for locations where conventional power sources are inaccessible.

At the core of the 7707 Solar Power Kit is a high-efficiency solar panel specifically calibrated to capture maximum sunlight and convert it into electrical energy. The panel is capable of supplying sufficient power to maintain optimal operation of the connected devices, even in low-light conditions. Integrated within the system is a rechargeable battery, which stores energy for use during nighttime or cloudy days, thus ensuring uninterrupted power supply.

The kit includes a rugged mounting bracket designed to withstand harsh environmental conditions, providing a stable and secure installation for the solar panel. The construction materials are chosen for their durability and resistance to corrosion, extending the lifespan of the system.

The Davis 7707 is equipped with a charge regulator, which intelligently manages the flow of electricity between the solar panel, battery, and weather station, preventing overcharging and ensuring efficient power use. The system's design prioritizes ease of installation and minimal maintenance, allowing for straightforward setup and long-term reliability.

This solar power kit is an environmentally friendly solution, reducing the need for fossil fuel-based energy sources and minimizing the carbon footprint of remote weather monitoring operations. Its integration with Davis Instruments' weather stations supports sustainability goals while delivering consistent performance in diverse climatic conditions.

Davis 7707 Solar Power Kit F.A.Q.

How do I install the Davis 7707 Solar Power Kit?

To install the Davis 7707 Solar Power Kit, first connect the solar panel to the battery using the provided cables. Mount the solar panel in a location with maximum sun exposure. Make sure the panel is securely attached to a stable surface.

What should I do if the solar panel is not charging the battery?

Ensure that the solar panel is receiving direct sunlight and is not obstructed by debris or dirt. Check all connections between the panel and the battery. If the problem persists, test the battery and solar panel with a multimeter to ensure both are functioning correctly.

How can I maintain the Davis 7707 Solar Power Kit for optimal performance?

Regularly clean the solar panel with a damp cloth to remove dust and dirt. Inspect connections for corrosion or wear, and check the battery for any signs of damage or reduced efficiency.

Can the Davis 7707 Solar Power Kit operate in low-light conditions?

The Davis 7707 Solar Power Kit can operate in low-light conditions, but its efficiency will be reduced. It's designed to work best in direct sunlight, so consider an auxiliary power source in persistently low-light areas.

What is the lifespan of the battery in the Davis 7707 Solar Power Kit?

The battery typically lasts between 3 to 5 years, depending on usage and environmental conditions. Regular maintenance and avoiding extreme temperatures can help prolong its lifespan.

How do I troubleshoot connectivity issues with the solar kit?

Check all cable connections to ensure they are secure. Inspect the cables for any signs of damage. Reset the system by disconnecting and reconnecting the battery. If issues persist, consult the user manual or contact customer support.

Is the Davis 7707 Solar Power Kit weather-resistant?

Yes, the Davis 7707 Solar Power Kit is designed to withstand various weather conditions, including rain and wind. However, it's advisable to regularly inspect the installation to ensure its durability.

What should I do if the battery is not holding a charge?

First, verify that the solar panel is charging the battery by checking the connection and measuring the voltage. If the battery still does not hold a charge, it may need to be replaced.

Can I use a different battery with the Davis 7707 Solar Power Kit?

It is recommended to use the battery specified by the manufacturer to ensure compatibility and optimal performance. Using a different battery could affect system efficiency and void the warranty.

How do I safely store the solar power kit during off-season?

Store the solar panel and battery in a cool, dry place. Disconnect all cables and ensure the battery is fully charged before storage. Regularly check the charge level of the battery if stored for extended periods.