Danby DAS120GBHWDB Installation Manual
![Danby DAS120GBHWDB Air Conditioner manual cover](/images/vcQLqaUMgxghoKECjbwHwwzj/thumbs/thumb175x175.webp)
To install the Danby DAS120GBHWDB air conditioner, ensure you have a compatible window size. Secure the mounting bracket, place the unit in the window, and lower the window sash to hold it in place. Seal any gaps with foam insulation to prevent air leaks.
Check if the air filter is clean and the thermostat is set to the desired temperature. Ensure the unit is not obstructed and the room is properly insulated. If issues persist, verify that the cooling mode is selected and inspect for any refrigerant leaks.
The air filter should be cleaned every two weeks or more frequently if the unit is used in a dusty environment. Remove the filter, wash it with warm soapy water, rinse thoroughly, and let it dry completely before reinserting.
Regularly clean the air filter, inspect the coils for dust buildup, and ensure the drainage system is clear. Check for any unusual noises or vibrations and ensure all settings are functioning correctly.
To reset the air conditioner, turn off the power and unplug the unit. Wait for a few minutes before plugging it back in and turning it on. This can help resolve minor electronic glitches.
Ensure the unit is installed with a slight tilt to allow proper drainage. Check if the drainage hole is blocked and clear any obstructions. Make sure the air filter is clean to prevent ice buildup and subsequent melting.
It is not recommended to use an extension cord with the air conditioner. Instead, plug it directly into a wall outlet to prevent overheating or electrical hazards.
Use the mode selector button on the control panel or remote control to switch between cooling and fan modes. Ensure the desired mode is highlighted on the display.
The Danby DAS120GBHWDB requires a standard 115V electrical outlet. Ensure the circuit is capable of supporting the air conditioner's electrical load to avoid tripping breakers.
To improve efficiency, keep doors and windows closed, use curtains or blinds to block sunlight, and set the thermostat to a moderate temperature. Regular maintenance, such as cleaning the filter and coils, will also enhance performance.