Daewoo Tornado Lyte 600W 2 in 1 Vacuum FLR00052 Manual
![Daewoo Tornado Lyte 600W 2 in 1 Vacuum FLR00052 Vacuum Cleaner manual cover](/images/YYBZmGvBwQLEsKZkPpwkOxrI/thumbs/thumb175x175.webp)
To assemble the vacuum, attach the handle to the main body until it clicks into place. Connect the desired attachment (such as the floor head or crevice tool) to the nozzle. Ensure all parts are securely fitted before use.
First, check if the dust container is full and empty it if necessary. Inspect the filters for blockages and clean them according to the manual’s instructions. Finally, check the nozzle and hose for any clogs.
It is recommended to clean the filters after every 3 to 4 uses, or whenever the suction power decreases. Wash the filters with warm water and let them dry completely before reinserting.
Store the vacuum in a cool, dry place. Ensure the power cord is neatly wrapped and the vacuum is placed in an upright position to prevent any accidental damage.
To convert to handheld mode, detach the handle by pressing the release button. Attach the desired accessory directly to the main body of the vacuum.
Ensure that the power cord is securely plugged into a functioning outlet. Check the fuse or circuit breaker. If the problem persists, consult the troubleshooting section in the user manual or contact customer support.
Regularly check the brush roll for tangled hair or debris. Use scissors or a brush to remove any obstructions. Refer to the manual for instructions on detaching and cleaning the brush roll if necessary.
The vacuum typically comes with a crevice tool, a dusting brush, and a floor head attachment for versatile cleaning. Refer to the packaging or manual for a complete list of included accessories.
Press the release button to detach the dust container. Open the lid and dispose of the contents into a waste bin. Ensure the container is closed securely before reattaching it to the vacuum.
Turn off the vacuum immediately and unplug it from the power source. Check for blockages in the filters and airways. Let the vacuum cool down for at least 30 minutes before attempting to use it again.