Daewoo 3 In 1 COL1317 Manual
![Daewoo 3 In 1 Air Conditioner COL1317 Air Conditioner manual cover](/images/YEtDgzlbcpVibSxdFkIYauhO/thumbs/thumb175x175.webp)
To set the Daewoo 3 In 1 Air Conditioner to cool mode, press the 'Mode' button on the remote control until the cool mode icon appears on the display. Adjust the temperature using the '+' or '-' buttons.
Ensure that the air filter is clean and not blocked. Check if the doors or windows are open, allowing warm air to enter. Make sure the temperature setting is correct and that the unit is set to cool mode.
To clean the air filter, turn off the unit and unplug it. Open the front panel and remove the filter. Wash it with lukewarm water and let it dry completely before reinstalling it.
Water leakage might be due to a clogged drain hose or improper installation. Ensure the unit is level and check the drain hose for blockages. Clean the hose if necessary.
The 'E1' error code indicates a problem with the temperature sensor. It is advisable to contact customer support or a professional technician to inspect and resolve the issue.
It is recommended to perform maintenance at least once a year. Regularly clean the air filter every month and check for any visible issues like leaks or unusual noises.
Yes, the Daewoo 3 In 1 Air Conditioner can be used as a heater. Set the unit to heat mode using the 'Mode' button on the remote control and adjust the temperature to your preference.
To reset the Daewoo 3 In 1 Air Conditioner after a power outage, turn off the unit and unplug it for a few minutes. Plug it back in and turn it on. This should reset the system.
When not in use, clean the unit thoroughly, cover it to prevent dust accumulation, and store it in a dry place. Ensure the unit is upright to prevent any internal damage.
A rattling noise could be due to loose parts or debris inside the unit. Turn off the unit and inspect for any loose screws or foreign objects. Tighten any loose parts and remove debris if present.