Daewoo Hurricane CAT3 FLR00054 Manual
![Daewoo Hurricane CAT3 FLR00054 Carpet Washer manual cover](/images/xfPyFUbSzuohmCILQZdlFjCM/thumbs/thumb175x175.webp)
To assemble the carpet washer, attach the handle to the main body, ensuring it clicks into place. Next, connect the water tank by sliding it into the designated slot until it locks securely. Refer to the instruction manual for detailed illustrations.
First, check if the power cord is securely plugged into a working outlet. Ensure the power switch is turned on. If it still does not work, inspect the fuse in the plug and replace if necessary. Consult a technician if the problem persists.
To clean the brushes, turn off and unplug the machine. Remove the brush cover by releasing the latches. Take out the brushes and rinse them under warm water to remove debris. Allow them to dry completely before reassembling.
Empty and rinse the water tank and recovery tank thoroughly. Clean the brushes and dry all parts. Store the machine in a dry, indoor location to prevent damage from moisture.
Ensure the recovery tank is not full and the nozzle is free from obstructions. Check that the tank seals are in good condition and the machine is properly seated on the carpet. Adjust the height setting if necessary.
Regular maintenance should be performed after every use, including cleaning the tanks and brushes. A thorough inspection of all parts should be conducted monthly to ensure optimal performance.
It is recommended to use a cleaning solution specifically designed for carpet washers. Avoid using bleach or harsh chemicals, as these can damage the machine and invalidate the warranty.
Stop using the machine immediately and unplug it. Check for any debris lodged in the brushes or hoses. If the noise persists, contact customer support for further assistance.
To replace the belt, unplug the machine and remove the brush cover. Slide the old belt off the motor pulley and replace it with a new one. Ensure the belt is aligned properly before reassembling the cover.
Before using the carpet washer, vacuum the area to remove loose pet hair. Use the carpet washer with the pet hair attachment, if available, to effectively lift embedded hair from the carpet fibers.