Daewoo DAB Plus FM Clock AVS1401 Manual
![Daewoo DAB Plus FM Clock Radio AVS1401 Radio manual cover](/images/yRXCcSPSZOlTkQjopmAnzBvD/thumbs/thumb175x175.webp)
To set the alarm on the AVS1401, press the 'Alarm' button until the alarm symbol appears. Use the 'Hour' and 'Minute' buttons to set the desired time and confirm by pressing 'Alarm' again.
Ensure that the device is plugged into a working power outlet. Check the power cable for any damage and ensure the power switch is turned on. If the issue persists, it may require servicing.
To improve radio reception, extend the antenna fully and position it for optimal signal strength. Avoid placing the radio near electronic devices that may cause interference.
First, check if the brightness settings are too low. If the display remains off, ensure the radio is powered and try resetting the device by unplugging it for a few minutes.
To reset the AVS1401, unplug the radio from the power source, wait for a few minutes, and then plug it back in. This will reset the settings to default.
No, the Daewoo AVS1401 does not support battery operation. It requires a connection to an AC power outlet for operation.
Press the 'DAB/FM' button to switch to DAB mode. The radio will automatically scan and store available DAB stations. Use the 'Tune' buttons to navigate through the stored stations.
The volume can be adjusted using the 'Volume +' and 'Volume -' buttons on the front panel of the radio.
Ensure that the volume is turned up and not muted. Check the connection to the power supply and try switching between FM and DAB modes to rule out a station issue.
To switch between FM and DAB modes, press the 'DAB/FM' button on the radio’s control panel. This will toggle between the available modes.