Daewoo Crystal Ball AVS1410 Manual
![Daewoo Crystal Ball Speaker AVS1410 Speaker manual cover](/images/euJUFkexvWUQxdSsfySgDzbQ/thumbs/thumb175x175.webp)
To connect your Daewoo Crystal Ball Speaker AVS1410 to a Bluetooth device, first ensure the speaker is turned on. Press the Bluetooth button to enter pairing mode. On your Bluetooth device, search for available devices and select 'Daewoo AVS1410' from the list. Once connected, you should hear a confirmation sound.
If the speaker isn't pairing, first ensure that the speaker is in pairing mode. Check that Bluetooth is enabled on your device. Try forgetting the speaker on your device's Bluetooth settings and attempt to reconnect. If the issue persists, restart both the speaker and your device.
To reset the Daewoo Crystal Ball Speaker AVS1410, hold down the power button for approximately 10 seconds until the speaker turns off. Release the button and turn the speaker back on. This should reset the speaker to factory settings.
The Daewoo Crystal Ball Speaker AVS1410 offers up to 8 hours of playtime on a full charge, depending on the volume level and audio content.
To charge the Daewoo Crystal Ball Speaker AVS1410, connect the provided USB cable to the charging port on the speaker and plug the other end into a USB power source. The LED indicator will light up to show that charging is in progress. It takes approximately 3 hours to fully charge the speaker.
If there is no sound, ensure that the speaker is turned on and the volume is turned up. Check that your device is properly connected to the speaker. Verify that audio is playing on the device and that it is not muted. If using Bluetooth, try reconnecting the device.
Yes, you can use the Daewoo Crystal Ball Speaker AVS1410 while it is charging. However, it is recommended to use a stable power source to avoid any interruptions.
To clean the Daewoo Crystal Ball Speaker AVS1410, use a soft, dry cloth to gently wipe the surface. Avoid using any harsh chemicals or abrasive materials that might damage the speaker's finish.
The LED indicator may flash for several reasons: a blue flashing light indicates that the speaker is in pairing mode, while a red flashing light typically means that the battery is low and needs to be charged. Refer to the user manual for more information.
If the sound quality is poor or distorted, check the Bluetooth connection for any interference. Move the device closer to the speaker to reduce signal loss. Ensure that the audio file is of good quality and that there are no obstructions blocking the speaker's sound output.