Daewoo 7.4V Compact Lyte Wet & Dry FLR00006 Manual
![Daewoo 7.4V Compact Lyte Wet & Dry FLR00006 Vacuum Cleaner manual cover](/images/uWLqvyfTdneGERRABoNnBniB/thumbs/thumb175x175.webp)
To charge the vacuum cleaner, connect the included charger to the charging port located on the handle of the device. Plug the charger into a power outlet. The charging indicator light will illuminate to show that the device is charging.
First, ensure that the vacuum cleaner is fully charged. If it still does not turn on, check for any blockages in the nozzle or filter that could be causing an issue. If the problem persists, contact customer support for further assistance.
To clean the filter, first detach the dust container from the vacuum cleaner. Remove the filter from the container and rinse it under cold water. Allow the filter to dry completely before reinserting it into the vacuum.
Store the vacuum cleaner in a cool, dry place. Ensure that it is turned off and fully charged before storage. Avoid storing in direct sunlight or in extreme temperatures.
Yes, the Daewoo 7.4V Compact Lyte is designed for both wet and dry cleaning. However, avoid using it on excessively wet surfaces to prevent damage to the motor.
Regularly empty the dust container and clean the filter. Check for blockages in the nozzle and hose. Periodically inspect the brush roll for tangled hair or debris.
The battery lasts approximately 20-30 minutes on a full charge, depending on the mode of operation and suction power used.
No, using the vacuum cleaner without the filter can cause damage to the motor and reduce suction efficiency. Always ensure the filter is properly installed before use.
Unusual noises may be caused by blockages or debris in the nozzle or hose. Check these areas and remove any obstructions. If the noise persists, inspect the brush roll and motor for any visible issues.
Check if the dust container is full and empty it if necessary. Clean or replace the filter if it is dirty or clogged. Ensure there are no blockages in the nozzle or hose.