Currys Essentials CUR50W12 Instruction Manual
![Currys Essentials CUR50W12 manual cover](/images/HHMiRHjKDqRWlzGfQywPMbmL/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counterclockwise to raise it.
Check if the thermostat is set to the correct temperature. Ensure that the vents inside the refrigerator are not blocked. Clean the condenser coils and check the door seals for any gaps or damage.
The refrigerator should be defrosted whenever the ice build-up reaches about 1/4 inch thickness. This typically needs to be done every couple of months, depending on usage.
Use a mixture of warm water and mild detergent to clean the interior. Remove all food items and shelves before cleaning. Rinse with clean water and dry with a soft cloth.
This may be due to a blocked defrost drain. Check and clear any obstructions in the drain hole located at the back of the fridge.
Keep the refrigerator away from heat sources, ensure door seals are intact, and avoid overloading it. Regularly clean the condenser coils and defrost it as needed.
Ensure that the refrigerator is level and not touching any walls or cabinets. Check for loose items inside that might be vibrating. If noises persist, consult a technician.
It is recommended to let hot food cool down to room temperature before placing it in the refrigerator to prevent increasing the internal temperature.
Inspect the door seals for any damage or debris. Ensure the fridge is not overfilled, preventing the door from closing. Adjust door hinges if necessary.
First, unplug the refrigerator. Locate the light bulb cover inside the fridge, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage.