Currys Essentials CUR48W22 Instruction Manual
![Currys Essentials CUR48W22 manual cover](/images/YofJQhscsgJiErwlISJXjqvJ/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
First, ensure that the refrigerator is plugged in and the power is on. Check the temperature settings and make sure the door seals are clean and sealing properly. If the problem persists, refer to the user manual or contact a technician.
The CUR48W22 is a manual defrost refrigerator. It is recommended to defrost it when the ice buildup reaches about 3-5 mm thickness. Typically, this might be needed every few months depending on usage.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry thoroughly before plugging back in and restocking.
Water pooling can occur if the defrost drain is blocked. Check and clear the drain located at the back of the appliance. Also, ensure that food items do not block the airflow inside the refrigerator.
Ensure that the refrigerator is level and stable. Check for any loose parts or items inside that might be vibrating. Also, make sure the refrigerator is not touching the wall or other surfaces.
Yes, it is normal for the back or sides of the refrigerator to feel warm. This is due to the heat exchange process during the cooling cycle.
Keep the refrigerator door closed to maintain the temperature as long as possible. Once power is restored, check that the appliance is running normally and inspect food items for spoilage.
First, unplug the refrigerator. Then, remove the light cover inside the fridge. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
It is recommended to have at least 5 cm of clearance at the back and sides of the refrigerator to ensure proper air circulation and efficient operation.