Currys Essentials CUL50W20 Instruction Manual
![Currys Essentials CUL50W20 manual cover](/images/FxKBhdQvLbojimBnmCpKNiHX/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat dial inside the larder. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
Ensure the door is fully closed and the seal is intact. Check if the thermostat is set to the correct temperature. If the issue persists, consider defrosting the unit and ensure it's not overloaded with food.
It is recommended to defrost the larder once every six months or when you notice a significant build-up of ice.
Yes, the door hinge on the Currys Essentials CUL50W20 Larder is reversible. Follow the instructions in the user manual to switch the hinge to the opposite side.
To clean the interior, unplug the larder, remove all contents, and use a solution of mild detergent and warm water. Wipe down all surfaces, rinse with clean water, and dry with a soft cloth.
Water pooling can occur if the defrost drain is blocked. Check and clear any blockages in the drain hole at the back of the larder to ensure proper drainage.
Ensure the door seals are intact, avoid overloading the larder, and place it away from heat sources. Keep the thermostat at the recommended setting and defrost regularly.
Unusual noises could be due to the larder not being level. Adjust the feet to stabilize it, and ensure it is not touching any surrounding surfaces that could cause vibrations.
The shelves in the Currys Essentials CUL50W20 Larder are designed to hold up to 20 kg each. Avoid placing heavy items on the shelves to prevent damage.
Regularly check the door seals for any signs of wear or damage. You can test the seal by closing the door on a piece of paper; if you can pull it out easily, the seal may need to be replaced.