Currys Essentials CUC50W11 Instruction Manual
![Currys Essentials CUC50W11 manual cover](/images/GkHXQggUQtwYdTaAnVJxTAKe/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control dial inside the fridge compartment. Turn the dial clockwise to lower the temperature or counterclockwise to increase it.
First, check if the temperature setting is correct. Ensure the door seals are clean and intact. Make sure the fridge is not overloaded and that air vents inside are not blocked.
It's recommended to defrost the freezer compartment when the frost build-up is about 3-5mm thick. This usually occurs every 6 months depending on usage.
Use a mixture of mild detergent and warm water. Remove all food items and shelves, then wipe the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing shelves and food.
It's not recommended to store hot food directly in the fridge as it can raise the internal temperature and affect cooling efficiency. Allow food to cool to room temperature before refrigerating.
Water pooling can occur if the defrost drain is blocked. Check and clear any debris from the drain hole located at the back of the fridge compartment.
Ensure the fridge is placed away from heat sources and direct sunlight. Keep the door closed as much as possible and ensure the door seals are tight. Regularly defrost the freezer to maintain efficiency.
Check if the fridge is level and stable. Ensure that it's not in contact with walls or cabinets. Confirm that items inside are not vibrating against each other. If noise persists, consult a technician.
Empty the fridge and secure shelves inside. Tape the doors shut and ensure the power cord is unplugged. Move the fridge upright using a dolly to prevent damaging the compressor.
Regularly clean the condenser coils and interior, check and replace door seals as needed, defrost the freezer compartment periodically, and ensure proper temperature settings are maintained.