Currys Essentials CIFF7018 Instruction Manual
![Currys Essentials CIFF7018 manual cover](/images/umJatyobpwJWWZMKQybvsuFc/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counter-clockwise to increase it.
First, ensure that the refrigerator is plugged in and the power is on. Check the thermostat setting and ensure the door seals are clean and intact. If the issue persists, consider defrosting the appliance or contacting customer support.
It's recommended to defrost the refrigerator every six months or when the frost build-up is more than 5mm thick.
Use a mixture of mild detergent and warm water. Remove all food and shelves, then wipe the interior surfaces with a soft cloth. Rinse with clean water and dry thoroughly before replacing the shelves and food.
Some noise is normal; however, if you hear loud or unusual sounds, check that the refrigerator is level and not touching the wall. Also, ensure that the internal components like the fan and compressor are functioning properly.
Store food in sealed containers and clean spills immediately. Use an open box of baking soda inside the refrigerator to absorb odors. Ensure regular cleaning of the interior surfaces.
Inspect the door seal for any visible damage or dirt. Clean it with warm soapy water and allow it to dry. If the seal is damaged, it may need to be replaced to maintain efficient operation.
First, unplug the refrigerator. Locate the light cover inside and remove it by unscrewing or unclipping it. Replace the bulb with a new one of the same type and wattage, then reattach the cover and plug the refrigerator back in.
Ensure that the refrigerator is level and not tilted. Check the drain pan and drain tube for blockages. Also, inspect the door seals to ensure they are clean and functioning properly.
Ensure the refrigerator is placed in a cool location away from heat sources. Maintain the temperature settings at optimal levels, and ensure the door is closed tightly to prevent cool air from escaping. Regular maintenance and cleaning also help improve efficiency.