Currys Essentials CID45B20 Instruction Manual
![Currys Essentials CID45B20 manual cover](/images/enEQRcemewvCscpHzxRjFMlg/thumbs/thumb175x175.webp)
To reset the dishwasher, press and hold the Start button for 3 seconds until the indicator lights turn off. This will reset the current program and allow you to select a new one.
Ensure the dishwasher is properly plugged in and the door is securely closed. Check if the water supply is turned on and the circuit breaker is not tripped.
Remove the lower dish rack and unscrew the filter unit located at the bottom of the dishwasher. Rinse the filter under running water to remove debris and reassemble it carefully.
Ensure that the Rinse Aid dispenser is filled, as this helps with drying. Also, check if the selected program includes a drying cycle and do not overload the dishwasher.
Spots are typically due to hard water. Make sure the Rinse Aid dispenser is filled and consider using a water softener if hard water is a persistent issue.
It is recommended to clean the filter and spray arms monthly. Additionally, descale the dishwasher every 3-6 months to maintain optimal performance.
Check the door seal for any damage or debris. Ensure the dishwasher is level and inspect the hoses for leaks. Replace any damaged parts as necessary.
No, regular dish soap can create excessive suds and cause overflow issues. Always use detergents specifically designed for dishwashers.
Noises can be caused by items touching the spray arms or loose components. Ensure dishes are loaded correctly and check if any parts need tightening.
Load larger items on the bottom rack and smaller items on the top. Ensure dishes do not block the spray arms and that the detergent dispenser can open freely.