Currys Essentials CID45B10 Instruction Manual
![Currys Essentials CID45B10 manual cover](/images/cffIAfJuAQctHKsHMgXcqhKw/thumbs/thumb175x175.webp)
Ensure that you load large items at the sides and back of the dishwasher and avoid blocking the spray arms. Place cups and glasses on the upper rack, and pots and plates on the lower rack.
Check for clogs in the drain hose or filter. Make sure the sink's drain is not blocked. Clean the filter and ensure that the drain hose is not kinked.
Ensure that the spray arms are not blocked and can rotate freely. Check that the detergent is fresh and the water temperature is at least 120°F (49°C). Clean the filter and spray arms regularly.
Check if the dishwasher door is closed properly and latched. Ensure that the appliance is plugged in and the circuit breaker isn't tripped. Verify that the water supply is turned on.
Regularly clean the filter, check and clean spray arms, and wipe down the door seals. Run a cleaning cycle with a dishwasher cleaner once a month to remove build-up.
To reset the dishwasher, turn off the appliance, wait for a few minutes, and then turn it back on. If the issue persists, consult the user manual for further instructions.
Unusual noises can be caused by items in the dishwasher rattling against each other or the spray arms. Ensure that items are loaded correctly and that nothing is obstructing the spray arms.
Clean the filter and spray arms, and run an empty cycle with a cup of white vinegar on the top rack. Regularly clean the door seal and check for food debris.
Ensure you are using the correct amount of detergent and rinse aid. Avoid overloading the dishwasher and use a dishwasher cleaner to remove mineral deposits regularly.
Use a high-quality dishwasher detergent, either in powder, liquid, or tablet form, that is suitable for your water hardness. Refer to the manufacturer's recommendations for the best results.