Currys Essentials CDW60B14 Instruction Manual
![Currys Essentials CDW60B14 manual cover](/images/jbRhRITxcOHBxMQECjKlMDmV/thumbs/thumb175x175.webp)
To clean the filter, first remove the lower dish rack. Turn the filter counterclockwise and pull it out. Rinse it under running water and use a soft brush to remove food particles. Reinsert the filter by aligning it properly and turning it clockwise until it locks into place.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and there are no obstructions in the drain pump. If the problem persists, check the dishwasher’s manual for further troubleshooting steps or contact a professional technician.
Ensure that the dishwasher is properly plugged into a power source and that the circuit breaker is not tripped. Check if the door is fully closed and latched. Verify that the water supply is turned on. If the issue continues, consult the user manual or contact customer support.
Ensure that you are using a rinse aid, as it significantly improves drying performance. Also, select a higher temperature wash cycle and avoid overloading the dishwasher, which can impede proper drying.
Regularly clean the filter and spray arms. Run an empty cycle with dishwasher cleaner to remove limescale and grease. Inspect and clean the door gasket and check for blockages in the drain. Additionally, ensure the dishwasher is leveled to avoid leaks.
Refer to the user manual to locate the water hardness setting menu. Use the control panel to adjust the setting according to your local water hardness level. This helps in optimizing detergent usage and improving cleaning efficiency.
Clean the filter and check for food debris in the bottom of the dishwasher. Run a cycle with a dishwasher cleaner or a cup of white vinegar placed on the top rack. Ensure regular maintenance to prevent odors from developing.
Ensure you are using the correct amount of dishwasher detergent and a rinse aid. Check the water hardness setting and adjust if necessary. Avoid overloading the dishwasher and ensure proper placement of dishes for optimal water circulation.
Use the intensive or heavy wash cycle for heavily soiled pots and pans. This cycle uses higher water temperatures and longer washing times to effectively remove tough residues.
To reset the dishwasher, turn it off by pressing the power button. Wait a few seconds and then turn it back on. If the issue persists, refer to the troubleshooting section of the user manual or contact customer service for assistance.