Currys Essentials CDW45W10 Instruction Manual
![Currys Essentials CDW45W10 manual cover](/images/APXKgjaUEnJKuhcwrYVsxdYI/thumbs/thumb175x175.webp)
To reset the dishwasher, turn it off and unplug it from the power supply for about 10 minutes. After plugging it back in, turn it on and select a new wash cycle.
Check the drain hose for any blockages or kinks. Ensure the sink drain is clear. Clean the dishwasher filter and check the drain pump for obstructions.
Remove the bottom rack to access the filter. Twist the filter counterclockwise to remove it. Rinse it under warm water and use a soft brush to clean debris. Reinstall by twisting it clockwise.
Unusual noises may be due to items touching each other or the spray arms. Ensure dishes are loaded properly and check that spray arms can rotate freely.
Use a high-quality dishwasher detergent tablet or powder specifically designed for automatic dishwashers. Avoid using dishwashing liquid for handwashing.
White spots or cloudy residue may be due to hard water. Use a rinse aid to help prevent this. Also, ensure you are not overloading the dishwasher, which can impede rinsing.
Clean the filter and wipe down the door seals monthly. Inspect spray arms and clean as needed. Run a cleaning cycle with dishwasher cleaner every 3-4 months.
Ensure the rinse aid dispenser is full, as rinse aid improves drying. Use a high-temperature wash setting and open the door slightly after the cycle to allow excess moisture to escape.
Check if the door is properly closed and latched. Ensure the dishwasher is securely plugged into the power outlet. Verify that the circuit breaker has not tripped.
Place larger items on the bottom rack and smaller items on the top rack. Avoid overcrowding and ensure items are not blocking the spray arms. Utensils should be placed in the cutlery basket with handles facing down.