Currys Essentials CDW45S14 Instruction Manual
![Currys Essentials CDW45S14 manual cover](/images/UIgSdRPFrBrenLloGRnMUuus/thumbs/thumb175x175.webp)
To properly load dishes, place larger items at the back and sides, and smaller items in the middle. Ensure that dishes do not block the spray arms and that all items are securely placed to avoid falling over during the wash cycle.
Check for blockages in the drain hose, filter, and sump. Ensure the drain hose is not kinked and that the sink drain is not clogged. Clean the filter and remove any debris to allow proper drainage.
To clean the filter, remove the bottom rack and twist the filter counterclockwise to unlock it. Rinse the filter under running water and use a soft brush to remove any stubborn debris. Reinsert the filter and twist clockwise to lock it into place.
Ensure the dishwasher is properly plugged in and that the circuit breaker is not tripped. Check that the door is fully closed and latched. If the problem persists, inspect the control panel for error codes and consult the manual.
Ensure that you are using the right amount of detergent and that the rinse aid dispenser is filled. Hard water can cause spots, so consider using a water softener if necessary. Regularly clean the dishwasher and check for any buildup of mineral deposits.
Check for any loose items or utensils that may be hitting the spray arms. Ensure that the dishwasher is level and that the spray arms are not obstructed. Inspect the pump and motor for any signs of damage or wear.
It's recommended to clean the interior of the dishwasher once a month. Use a dishwasher cleaner or a vinegar and baking soda solution to remove grease, limescale, and odors. Run a hot wash cycle to thoroughly clean the interior.
Yes, you can wash plastic items, but place them on the top rack to avoid melting or warping. Ensure that the items are dishwasher safe and avoid placing them near the heating element.
The CDW45S14 offers several wash cycles, including Normal, Eco, Intensive, and Quick. Use Normal for regular loads, Eco for energy-saving, Intensive for heavily soiled items, and Quick for lightly soiled dishes.
To reset the dishwasher, press and hold the Start/Reset button for about 3 seconds until the dishwasher beeps. This will cancel the current cycle and reset the dishwasher to its default settings.