Currys Essentials C510WMS13 Instruction Manual

To start a wash cycle, first load your laundry into the drum. Add the appropriate amount of detergent to the dispenser. Close the door securely. Turn the program selector to choose your desired cycle. Press the start/pause button to begin the wash.
If the washing machine is not draining, check that the drain hose is not kinked or blocked. Also, ensure that the filter is clean and free of debris. If the problem persists, there could be an issue with the pump that may require professional service.
To clean the detergent drawer, remove it by pulling it out until it stops, then press the release button to fully remove it. Rinse the drawer under warm water to remove any detergent residue. Ensure it is completely dry before reinserting it into the machine.
It is recommended to clean the filter every month to ensure optimal performance. This helps to prevent any blockages and maintain efficient drainage.
Check that the washing machine is level by adjusting the feet. Make sure the load is balanced and not too small, as this can cause excessive vibration. Avoid overloading the machine, and distribute laundry evenly inside the drum.
To perform a maintenance wash, run an empty cycle with the drum set to the hottest temperature. Add a cup of white vinegar or a washing machine cleaner to the detergent drawer to help remove any build-up inside the machine.
For delicate fabrics, use a gentle or delicate cycle with cold water. Select a low spin speed to protect the fibers of the fabric. Use a mild detergent to avoid damaging the clothing.
To prevent mold and mildew, leave the door and detergent drawer slightly open after each wash to allow air circulation. Regularly clean the door seal with a mixture of water and vinegar. Perform maintenance washes periodically.
Ensure that the machine is plugged in and that the power socket is functioning. Check that the door is closed securely. Make sure the water supply is turned on. If the issue continues, inspect the fuse or circuit breaker.
Run an empty hot wash cycle with a cup of baking soda or a washing machine cleaner to eliminate odors. After each wash, leave the door open to allow the drum to dry and discourage odor build-up.