Currys Essentials C510WM12 Instruction Manual
![Currys Essentials C510WM12 manual cover](/images/XoSRSzChIXFeYTNJsaEPineo/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent to the dispenser, select the desired wash program using the program dial, and press the 'Start/Pause' button.
Check if the drain hose is kinked or blocked, and ensure the filter is clean. If the issue persists, inspect the pump for obstructions or contact a technician.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water, using a soft brush to remove residue before reinserting it.
Regularly clean the detergent drawer, door seal, and filter. Run a maintenance wash with a machine cleaner or vinegar and baking soda every month.
Ensure the machine is level and evenly balanced. Check if the transit bolts have been removed and that the load is evenly distributed.
Check that the water supply taps are turned on and that the inlet hoses are not kinked. Also, inspect the inlet filters for any blockages.
Error codes indicate specific issues such as drainage problems or water supply issues. Refer to the user manual for code meanings and solutions.
Leave the door and detergent drawer open after use to allow air circulation. Regularly clean the door seal and run a hot wash with vinegar monthly.
The maximum load capacity for the C510WM12 washing machine is 5 kg for cottons and mixed fabrics. Avoid overloading to ensure effective washing.
Ensure the cycle has fully completed and wait a few minutes for the lock to release. If it remains locked, check if the water level is too high or manually drain excess water from the machine.