Currys Essentials C15JKW13 Instruction Manual
![Currys Essentials C15JKW13 manual cover](/images/rmRjmhhEjtDwBjhpRhrugcOe/thumbs/thumb175x175.webp)
To descale your kettle, fill it with a mixture of half water and half vinegar. Boil the mixture, then let it sit for 30 minutes. Rinse thoroughly with clean water before using again.
Check if the kettle is properly plugged in and ensure that the power outlet is functioning. Also, make sure the lid is closed correctly and the kettle is seated properly on its base.
This could be due to limescale build-up. Regularly descaling the kettle should reduce the noise. If the problem persists, check if the heating element is damaged.
No, it is not recommended to boil milk in the kettle as it can cause damage and lead to difficult cleaning. Use the kettle for boiling water only.
Clean the exterior of the kettle with a damp cloth. Avoid using abrasive cleaners or immersing the kettle in water.
Check if the lid is closed properly and ensure that the water level is below the maximum mark. If leaking persists, inspect the kettle for cracks or damage.
While leaving water in the kettle overnight is generally safe, it is advisable to empty and rinse the kettle regularly to prevent limescale and bacteria build-up.
Regularly descale the kettle and use filtered water to reduce limescale build-up. Empty the kettle after each use to prevent standing water.
The Currys Essentials C15JKW13 kettle has a capacity of 1.5 liters.
If the kettle has boiled dry, it will automatically switch off. Allow it to cool before refilling with water. It is equipped with boil-dry protection for safety.