Currys Essentials C155CW10 Instruction Manual
![Currys Essentials C155CW10 manual cover](/images/aVznsEeQAGUHLWPXqOUDcvox/thumbs/thumb175x175.webp)
To set the temperature, locate the thermostat dial inside the refrigerator. Turn the dial to the desired setting, with 1 being the warmest and 5 being the coldest. For optimal performance, a mid-range setting of 3 is recommended.
Check if the refrigerator is plugged in and the power is on. Ensure the thermostat is set correctly and not on the lowest setting. Clean the condenser coils and check that the door seals are not damaged.
Manual defrosting is recommended when the ice build-up exceeds 5mm. Typically, this should be done every 3 to 6 months, depending on usage and humidity levels.
Unplug the refrigerator, remove all food and shelves, and use a mixture of mild detergent and warm water to clean the interior. Rinse with clean water and dry thoroughly before replacing shelves and food.
Water pooling could be due to a blocked defrost drain. Check for blockages and clear any debris. Ensure the refrigerator is level to allow proper drainage.
Ensure the door seals are intact, avoid placing the refrigerator near heat sources, and keep the interior organized to allow air circulation. Setting the thermostat to the recommended level also helps.
Check if the refrigerator is level and not touching any walls or cabinets. Ensure that items inside are not vibrating against each other. Normal operational noises include humming and slight popping sounds.
Unplug the refrigerator, remove the light cover, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Store raw meat on the bottom shelf, use the crisper drawers for fruits and vegetables, and keep dairy and drinks on the upper shelves. Avoid overcrowding to ensure proper air circulation.
Regularly clean spills, store strong-smelling foods in airtight containers, and place an open box of baking soda inside to absorb odors.