Currys Essentials C10TIR10 Instruction Manual

To descale the Currys Essentials C10TIR10 Iron, fill the water tank with a mixture of equal parts water and white vinegar. Heat the iron and let it steam for a few minutes. Then, unplug the iron, let it cool, and rinse out the tank with clean water.
First, check if the iron is properly plugged in and the outlet is functioning. Ensure that the temperature dial is set correctly. If the problem persists, the heating element may be faulty, and professional repair may be needed.
To prevent water leakage, make sure not to overfill the water tank and avoid using the steam function at low temperatures. Always store the iron in an upright position.
Clean the soleplate with a damp cloth and mild detergent. For stubborn stains, use a mixture of baking soda and water, applying it gently with a non-abrasive sponge.
Fill the water tank, set the iron to the appropriate temperature for your fabric, and wait for the indicator light to signal readiness. Press the steam button as you iron to release steam to remove wrinkles efficiently.
Regularly clean the water tank, descale as needed, and wipe the soleplate. Ensure the cord is in good condition and store the iron in a cool, dry place.
A brownish discharge is often caused by mineral build-up or dirt within the iron. Descale the iron following the manufacturer's instructions and regularly clean the soleplate.
Always unplug the iron when not in use, do not leave it unattended while hot, and keep it away from flammable materials. Regularly inspect the power cord for damage.
Ensure the water tank is filled and the iron is set to the correct temperature. If the steam function still doesn't work, the steam holes may be blocked. Clean them with a cotton swab and descale the iron.
Empty the water tank before storage, allow the iron to cool completely, and wrap the cord loosely around the base. Store it in an upright position in a dry place.