Cuisinart CROW-25B Installation Guide
![Cuisinart CROW-25B manual cover](/images/bf3f8eeb575a14514bc9caa0/thumbs/thumb175x175.webp)
To descale your Cuisinart CROW-25B, fill the water reservoir with a mixture of one-third white vinegar and two-thirds water. Start a brew cycle and let it run halfway, then turn off the machine. Let it sit for 30 minutes before completing the cycle. Rinse by running a full cycle with fresh water.
If your Cuisinart CROW-25B is not brewing, ensure it is plugged in and turned on. Check if there is enough water in the reservoir and that the filter basket is properly seated. Descale the machine if necessary, and make sure the carafe is positioned correctly.
Remove the filter basket and discard any used coffee grounds. Wash the basket with warm, soapy water or place it on the top rack of a dishwasher. Rinse thoroughly and dry before reinserting it into the machine.
If your Cuisinart CROW-25B is leaking water, check the water reservoir for cracks and ensure it's seated properly. Examine the seals and gaskets for wear and replace if necessary. Also, ensure that the carafe is positioned correctly and not overfilled.
To adjust the brew strength on the Cuisinart CROW-25B, use the strength control button before starting the brew cycle. Select your preferred strength setting: regular or bold.
A loud noise during brewing can be caused by mineral buildup. Descaling the machine can help reduce noise. Ensure the machine is on a stable surface and that all components are properly assembled.
Replace the charcoal water filter in your Cuisinart CROW-25B every 60 days or after 60 uses, whichever comes first, to ensure optimal performance and water quality.
Yes, you can use pre-ground coffee in the Cuisinart CROW-25B. Simply add the desired amount of ground coffee to the filter basket. Adjust the amount based on your taste preference and the number of cups being brewed.
When not in use, store your Cuisinart CROW-25B in a cool, dry place. Ensure it is unplugged and thoroughly cleaned. Keep the lid open to allow any remaining moisture to evaporate.
To program the auto-start feature, press the program button until the display flashes. Use the hour and minute buttons to set the desired start time. Press the program button again to confirm the setting. Ensure the machine is prepared with water and coffee before the start time.