Cookworks 3398771 SG500 Instruction Manual
![Cookworks 3398771 SG500 Food Processor manual cover](/images/smgyKEEyCBTweqqQCEJvRlhN/thumbs/thumb175x175.webp)
To assemble the Cookworks 3398771 SG500, ensure the bowl is securely locked onto the base, then attach the desired blade or disk. Finally, place the lid and ensure it clicks into place before operating.
Check that all parts are correctly assembled, the bowl and lid are locked in place, and the unit is plugged in. If it still doesn’t start, inspect the power outlet and circuit breaker.
Ensure the appliance is unplugged. Remove all detachable parts and wash them with warm, soapy water. Wipe the motor base with a damp cloth. Do not immerse the base in water.
Regularly clean all parts after use, avoid overloading, and store blades safely to prevent damage. Periodically check for wear on parts and replace them if necessary.
Consult the user manual for specific instructions on each attachment. Generally, use slicing disks for cutting, chopping blades for mincing, and dough blades for kneading.
Ensure the blades are clean and free from obstructions. If dull, consider replacing them. Check the assembly to make sure they are properly attached.
Yes, to ensure optimal performance, do not exceed the maximum capacity indicated in the user manual, usually marked inside the bowl.
Periodically scrape down the sides of the bowl with a spatula during processing. Ensure the ingredients are evenly distributed before starting.
Turn off and unplug the unit immediately. Allow it to cool for at least 20 minutes before restarting. Avoid overloading and ensure adequate ventilation during operation.
Ensure the food processor is on a stable, flat surface. Check that all parts are assembled correctly and that the unit is not overloaded.