Cobra ACXT145 User's Guide
![Cobra ACXT145 manual cover](/images/cd331e8bbfadaa556618d139/thumbs/thumb175x175.webp)
To pair two Cobra ACXT145 radios, turn both radios on and set them to the same channel. Ensure both radios are within range and on the same privacy code if applicable. Press the 'Talk' button to confirm communication.
The Cobra ACXT145 radios have a maximum range of up to 16 miles under optimal conditions. However, range can vary based on terrain, weather, and obstructions.
To change the channel on your Cobra ACXT145, press the 'Mode' button until the channel number starts flashing. Use the 'Up' or 'Down' buttons to select the desired channel. Press 'Mode' again to set the channel.
The Cobra ACXT145 uses 3 AAA alkaline batteries. Ensure to replace all batteries at the same time for optimal performance.
To maximize battery life, turn off the radio when not in use, use the low power mode if available, and reduce the volume. Also, consider using high-quality batteries.
Static noise can occur due to interference from electronic devices or being out of range. Ensure both radios are on the same channel and within range. Move away from potential sources of interference.
If the radio does not turn on, check the battery installation and ensure they are inserted correctly. Replace with fresh batteries if necessary. Also, check for any corrosion in the battery compartment.
To activate the call alert feature, press the 'Call' button. Your radio will transmit a tone to alert the other radio users. Make sure both radios are on the same channel.
Yes, you can use rechargeable AAA batteries in the Cobra ACXT145. Ensure they are fully charged before use. Note that the performance may vary depending on the battery brand and capacity.
To clean your Cobra ACXT145, use a soft, damp cloth. Avoid using harsh chemicals or solvents. Regularly check the battery compartment for corrosion and ensure the antenna is secure. Store the radio in a dry place when not in use.