Cobra ACXT645 Owner's Manual

To pair two Cobra ACXT645 radios, turn both radios to the same channel and privacy code, then press and hold the "Talk" button on one radio while speaking. The other radio should receive the transmission if settings match.
First, check if the batteries are correctly installed and fully charged. If the radio still doesn't turn on, try replacing the batteries. Ensure the battery contacts are clean and free from corrosion.
To maximize range, ensure that there are minimal obstructions between the radios. Use them in open areas, and hold the radio vertically with the antenna pointing upwards. Using fresh batteries can also improve range.
Static noise can occur due to interference from other electronic devices or being at the edge of the communication range. Try changing the channel or moving to a different location to reduce interference.
Press the "Weather" button until you hear the NOAA Weather Radio broadcast. To activate weather alerts, access the menu, navigate to the weather alert option, and select "On".
Use a soft, damp cloth to clean the exterior of the radio. Avoid using harsh chemicals. Ensure that the battery contacts are clean and dry. Regularly check and remove any debris from the microphone and speaker areas.
Yes, the Cobra ACXT645 can use NiMH rechargeable batteries. Ensure you use the appropriate charging dock or charger designed for these batteries.
To reset the radio, turn it off, then press and hold the "Mode" button while turning the radio back on. This will reset all settings to factory defaults.
The "Roger Beep" function sends a tone when you release the "Talk" button to indicate the end of your transmission. This feature can be turned on or off in the radio's menu settings.
Press and hold the "Lock" button for two seconds to lock or unlock the keypad. This prevents accidental channel changes or settings adjustments.