Cello C24ANSMT V3 User Guide
en
24 LED TV
Contents
Unpacking the TV / Accessorys Installing / Removing the Base Stand
Front / Right Side View and Controls Rear View and Sockets
OSD Menu 1
Installing Batteries in the Remote Control
. Picture Setting 2. Sound Setting 3. Channel Setting 4. Lock Setting
Maintenance
1 2
3 4
13-22
21noitarepO cisaB
13-14 15 16-18 19-20 21
23 25
26 26 25
27 27-28spiT dna stniH 29sedoM yalpsiD 30snoitacificepS 31-32sgninraW ytefaS
Remote Control
Making Video and Audio Connections
5-6 7
Remote Control Operation Range 7
8 Connecting an AV Device with an HDMI Cable 8 Connecting a Computer with a VGA Cable 9 Connecting a Digital Audio Receiver 9 Connecting Headphones 10 Turning the TV on for the First Time 11-12
5. Time Setting
Connecting a USB Storage Device Viewing Photos Listening to Music Watching Movies Viewing Texts
6. Option Setting 22
Waste Electrical Recycling 33
your new 24 LED TV.
1
(ST4 x 14 3PCS)
(ST4 x 14 2PCS) Neck
The parts
Installation
2
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
200 x 100 mm
(ST4 x 14 3PCS)
(ST4 x 14 2PCS) Neck
2.Put the stand to the neck of the TV set as shown below.
1.Place the neck in position as shown, fix it with the supplied screws(ST4x14).
(ST4x14 3 PCS)
3.Attach the stand with the supplied screws.
Screw size M4 x 8
200mm
100mm
DTV, Cable, ATV, AV, YPbPr, PC, HDMI1, HDMI2, SMART, USB
4
DC IN
AV Connect an external device to the composite VIDEO(Y) and AUDIO (L / R) out jacks found on most video equipment.
Android U
SB M
icro SD EthernetAndroid
U SB
M icro SD
Ethernet
DC IN VGA VIDEO L RDigital audio out HDMI2H MI1D
TV A
er ia
l M
IN I Y
P bP
r C
om m
on In
t e rf
a c e P
C A
U D
IO TV U S
B
Ethernet
12 Android USB
13 Micro SD
Connect the TV to the Internet
Allows the USB storage device to play video,audio,photo and text files in SMART mode,and works with air mouse .
Load external Micro SD memry card
Remote Control
5
Go to DVBT source
Home for android system
Go to DVBS source
Extend battery life ,picture will be dimmer.
Remote Control
6
Turn the wireless mouse on/off
Searches all ATV and DTV channels
DTV Cable ATV AV YPbPr PC HDMI1 HDMI2 SMART USB
7
1/2/3
8
LVGAHDMI2HDMI1 Digital Audio outPOWER RVIDEO
9
VGAHDMI2HDMI1 Digital Audio out PC AUDIO
TV USB
VGAHDMI2HDMI1 Digital Audio out
10
LVGAHDMI2HDMI1 Digital Audio out RVIDEO
11
5. If this is the first time you are turning on the TV and there are no programs in the TV memory, the Quick Start menu will appear on the screen. There are 4 setups as follow:
Mini YPbPr Mini AV
First Time Installation
OSD Language
Country
English
UK
MENU Return OK OK
First Time Installation
Auto Standby 4H
MENU Return OK OK
First Time Installation Tv Connection
Tune Type
DTV
DTV
MENU Return OK OK
First Time Installation
Please ensure the aerial cable is plugged into the TV. Now choose "OK", the TV will tune all available channels.
CancelOK
12
20
DTV, ATV, AV, SCART, YPBPR, HDMI1, HDMI2, HDMI3, PC, Media.
Mut e Mute
LOCK
Radio
/
Input Source DTV
Cable ATV AV
YPbPr
PC HDMI1 HDMI2 SMART USB
OK OK
13
PICTURE
Picture Mode Standard Contrast 50
Brightness 50
Saturation 50 Tint 50 Sharpness 50 Color Temperature Normal Aspect Ratio Auto Noise Reduction Middle
Enter OK Enter Select Exit Exit
Saturation Press the buttons to increase or decreases the saturation.
Auto
14
Menu
15
SOUND
Sound Mode Standard 120Hz 50
500Hz 50
1.5KHz 50 5KHz 50 10KHz 50 Balance 0 Auto Volume Off Surround Sound Off
Enter OK Enter Select Exit Exit
SPDIF Mode Off
Sports Menu
SPDIF Mode
Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selectingON.
Surround Sound Turn on/off the surround sound function by selecting On or Off.
16
1. Press the Menu button and then press the buttons to select the CHANNEL menu.
2. Press the OK buttons and then p
and then press the to select the following channel options ress the OK button.
Allows you to set up a variety of channel options.
CHANNEL
Auto Tuning DVB-T Manual Tuing
ATV Manual Tuing
Programme Edit Signal Information
Enter OK Enter Select Exit Exit
CI Information Software Update(USB)
Auto Tuning 1.Press the buttons to Auto Tuning then press the OK button to confirm.
2.In the Auto Tuing menu there are 2 options for you to selet from:Tune Type and Country.
3.Press the Menu button to return back to the main menu.
4.Press the Exit button to exit the menu.
17
DVB-T Mannual Tuning
1.Select DVB-T Mannual Tuning,press the OK button to confirm.
Storage To 1 Press the buttons to change the numbered location of the found channel.
ATV Mannual Tuning
ATV Mannual Tuning
18
Programme Edit Use up/down keys to select program edit.Press OK or Right button to enter the menu.Use up/down buttons to navigate through the menu.
Delete
Press the RED button to delete the highlighted channel, a red circle will appear next to the cahnnel name.
Press the RED button again to confirm delete.
Press the MENU to return to the main menu.
Move
Press up/down to select the cahnnel,press yellow button to enter the move mode,then press up/down tomove the channel location,press yellow button again or press OK to confirm.
Press MENU to return to the main menu.
Skip
Press up/down to select the channel you wish to skip.
press the BLUE button,a logo will appear next to the channel name and the channel will be skipped when you scroll through the channels.
Press the BLUE button again on the highlighted channel to disable the skip function.Press MENU to return to the main menu.
Signal Information
Only available in DTV mode,Signal Information includes:channel/network/modulation/quality/strength.
CI Information
When insert CI Module,display CI Information.
Software Update(USB)
1.Download the software to the usb device,then insert the usb device to the unit. 2.Press the menu button to select the CHANNEL menu. 3.Press the left/right buttons to select Software Update(USB) and then press the OK button to update software. 4.When the updating is completed,the unit will be reset to standby mode.
19
Lock Setting
Lock
LOCK
Lock System Off Set Password
Block Program
Parental Guidance Off Key Lock Off Hotel Mode
Enter OK Enter Select Exit Exit
Lock System Lock System
Set Password: If you had already changed the password,enter the current password.
Block Program: This feature is available only for digital TV and the tuned-in channel must support it.
Key Lock:Press the buttons to select the Key Lock option and then press to choose between the options ON or OFF.After selecting ON,the front panel buttons TV/AV/ Menu/CH+/CH-/VOL+/VOL- of the device will be locked.
20
Lock Setting
Hotel Mode
Press the up/down buttons to select the Hotel Mode option and then press right button to choose between the options ON or OFF.
Source Lock
Press the up/down buttons to select the Source Lock option and then press OK to enable the menu. Press the right button to toggle between ON and OFF.All signal sources labelled ON will not be available any more in the signal source selection menu.
Default Source
Press up/down buttons to select the Default Source option and then press right button to choose a signal source or OFF.This function lets you set the signal source(DTV/Cable/ATV/AV/SCART/YPbPr/PC/HDMI1/ HDMI2/HDMI3/USB) to be used when powering on the unit.It will be used until you select a different signal source or disable this function(OFF).
DTV Channel Type
Default Prog
Press left/right buttons to select Last or 7488.
Max Volume
Press up/down buttons to select the Max Volume option and then press right button to set the desired volume. Then the output volume will never exceed the set maximumvalue.
Default Volume
Press up/down buttons to select the Default Volume option and then press right button to set the default volume.
Clear Lock
Press up/down buttons to select the Clear Lock option and then press right button to anable it.Allhotel settings will remain disabled until you enable the Hotel Lock again.
HOTEL
Hotel Mode On Source Lock
Default Source ATV
DTV Channel Type DTV Default Prog Last Max Volume 100
Enter OK Enter Select Exit Exit
Default Volume 25 Clear Lock
21
Time Setting
TIME
Clock 01/Jan 01:08 Off Time Off
On Time Off
Sleep Timer Off Auto Standby 4H Time Zone London GMT
Enter OK Enter Select Exit Exit
OSD Timer 15 S
Time
Clock
Press the OK button to set date and time.
Off Time
Press the OK button to set off time.
On Time
Press the OK button to set on time.
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed.The clock will be set automatically when receiving a digital signal.Time must be set before using Sleep Timer function.
Press up/down buttons to select a period of time after which the TV automatically switches to standby mode: OFF/10/20/.../180/240 min and then press the OK button to confirm.The timer begains to count down from the number of minutes selected.
Auto Standby
The unit will automatically switch to standby mode 4 hours after the last time the remote control was used. A reminder screen will pop up and count down before the unit switches to standby mode.If you want to operate the TV for a long period of time,tun off the auto standby function by selecting Never.
Time Zone
When you select a Time Zone city,the TV time is set by the time offset information based on Time Zone and GMT which is received with the broadcast signal and the time is set automatically by a digital signal. Press the up/down/left/right buttons to select the desired time zone city and then press the OK button to confirm.(DTV mode)
OSD Timer
Press up/down buttons to select the display time of the on-screen menu:5s/10s/15s/20s/25s/30s/Nevel and then press the OK button to confirm.
22
OPTION
OSD Language English Audio Languages English
Subtitle Language English
Hearing Impaired Off PVR File System Reset
Enter OK Enter Select Exit Exit
First Time Installation
Option Setting
Option
Home Mode Home Blue Screen Off
OSD Language
Allows you to select the on screen display menu language.
Audio Languages
Select the audio languages.The availability of this function depends on the tuned-in channel.(can only be selected in DTV mode)
Subtitle Language
Select the subtitle language.The availability of this function depends on the tuned-in channel.(can only be selected in DTV mode)
Hearing Impaired
Allows you to show more information in subtitles for the hearing-impaired in some programmes(can only be selected in DTV mode)
PVR File System
Reset
Restores all settings to the factory defaults.
First Time Installation
This option allows you to reset the TV to the default factory setting.Once activated the TV will go to standby mode.
Home Mode
Allow you to select among:Max Performance mode Home mode and Max Economy mode.
Blue Screen
Press left/right buttons to select ON or OFF
23
Mini YPbPr Mini AV
24
Multimedia Operation
Basic Operation
1.Press the SOURCE button on tje remote control to display the input source menu,select the USB source with the up/down buttons and press the OK button to enter the Multimedia menu below.
2.Press left/right buttons to select the files on the USB device(PHOTO,MUSIC,MOVIE,TEXT)to view or play.
Return to main menu
Preview
File Information
Press the up/down/left/right buttons to select and the OK button to activate the file or open folder.Press button to play the files in full screen mode.When in full screen mode press the OK button to show the navigation option menu on the bottom of the screen or press stop button to return to files.
Input Source DTV
Cable ATV AV
YPbPr
PC HDMI1 HDMI2 SMART USB
OK OK
25
1.Photo Photo viewing
Press left/right buttons to select the option on the menu,and press the OK button to activate.
Repeat: Select the repeat mode from Repeat All, Repeat1,Repeat None.
Music: Play/Pause the background music of your choice. Playlist: Display the playlist on the screen and select the photo of your choice.
Info: Display the information of the file.
Rotate: Rotate the photo clockwise/counterclockwise.
Zoom In/Out: Zoom In/Out of your photos.
Move view: Move the photo in Zoom out mode.
2.Music Listen to music
Press left/right buttons to select the option on the menu,and press the OK button to activate.
Play: Play the music.
FB: Retreat quickly.
FF: Fast forward.
Prev./Next: Go to a song/Turn to the next song.
Stop: Stop playing.
Repeat: Select the repeat mode from Repeat All, Repeat1,Repeat None.
Play List: Display the playlist on the screen.
Info.: Display the information of the music file.
Play: Play the photo.
Prev./Next: Go to on a picture/Go to the next picture.
Stop: Stop auto turning pages.
26
3.Movie Watch a film
Press left/right buttons to select the option on the menu,and press the OK button to activate.
Play: Play the movie.
FB: Retreat quickly.
FF: Fast forward.
Prev./Next: Go to a video/Turn to the next video.
Stop: Stop playing.
Repeat: Select the repeat mode from Repeat All, Repeat1,Repeat None.
Aspect Ratio: Select the aspect ratio of the on screen display.
Move View: Moves the enlarged picture area.
4.Text View text files
Press left/right buttons to select the option on the menu,and press the OK button to activate.
Prev/Next page: Turn to previous/next page of the text.
Prev./Next: Turn to previous/next file.
Stop: Stop auto turning pages.
Music: Play/pause the background music of your choice.
Playlist: Display the playlist on the screen.
Info: Display the information of the text file.
27
28
29
30
25 W
37kWh
24
1920 1080
200
200 x 100 mm / M4 x 8