Casio EXTR350S User's Guide
![Casio EXTR350S Camera manual cover](/images/NcMcTMAtNjvTraNQDkczBgFr/thumbs/thumb175x175.webp)
To transfer photos, connect the camera to your computer using the USB cable provided. Ensure the camera is turned on, and set to USB mode for file transfer. Your computer should recognize the device, allowing you to drag and drop files to your desired location.
First, check if the battery is charged. If the camera still does not turn on, try removing and reinserting the battery. Ensure the battery is properly aligned. If the issue persists, consider replacing the battery or consulting the user manual for further troubleshooting steps.
Blurry photos may result from camera shake or incorrect focus settings. Ensure you are holding the camera steady when taking a photo. Use a tripod if necessary. Check that the autofocus is functioning properly and adjust the focus setting as needed.
To reset the camera to factory settings, navigate to the settings menu, select 'Reset', and confirm your choice. This will restore all settings to their default values. Ensure you back up important data before performing a reset.
Use a soft, lint-free cloth slightly dampened with lens cleaning solution. Gently wipe the lens in a circular motion. Avoid using paper towels or rough fabrics as they may scratch the lens.
Check the Casio official website for the latest firmware update. Download the update and follow the provided instructions. Usually, this involves transferring the firmware file to the camera via a memory card and running the update from the camera's menu.
Ensure the camera is fully charged and restart it. Check for any visible damage to the display. If problems continue, perform a factory reset. If the issue persists after these steps, contact Casio support for assistance.
Yes, the Casio EXTR350S has settings to improve low light performance. Use the night mode or adjust the ISO settings to a higher sensitivity. A tripod can also help reduce blurriness due to longer exposure times.
The Casio EXTR350S is compatible with SD, SDHC, and SDXC memory cards. Ensure the card is properly inserted and formatted before use.
To enable the self-timer, press the 'Menu' button and navigate to the shooting settings. Select 'Self-timer' and choose the desired delay (e.g., 2 seconds or 10 seconds). Press the shutter button to activate the timer.