Casio EXTR350 User's Guide
![Casio EXTR350 Camera manual cover](/images/KgyXTFGquRCsGkroCmmygoXR/thumbs/thumb175x175.webp)
Connect the camera to your computer using a USB cable. Ensure the camera is powered on, then select 'USB Mode' from the menu. Your computer should recognize the camera as an external drive, allowing you to transfer photos.
Check if the battery is charged. If not, connect it to the charger and wait for a full charge. If it still doesn't turn on, try removing and reinserting the battery. If the problem persists, it might require service.
To reset the camera, go to the 'Setup' menu and select 'Reset'. Confirm the action when prompted to restore the camera to its factory settings.
Use a soft, lint-free cloth slightly dampened with water or a lens cleaning solution. Gently wipe the lens in a circular motion to remove any dirt or smudges. Avoid using rough materials that could scratch the lens.
Access the 'Setup' menu and scroll to 'Language'. Select your preferred language from the list and confirm your choice.
Ensure that the camera is steady when taking photos. Use a tripod if necessary. Check if the lens is clean and that the focus setting is appropriate for the subject. Also, verify that the shutter speed is suitable for the lighting conditions.
Turn off the camera and remove the memory card. Check for dirt or damage on the card and the slot. Reinsert the card and ensure it clicks into place. If the issue persists, try using a different memory card.
Reduce the screen brightness and limit the use of flash. Turn off the camera when not in use and consider using the power-saving mode. Also, only activate Wi-Fi or Bluetooth when necessary.
Yes, the Casio EXTR350 can record videos. Switch to video mode using the mode dial, then press the shutter button to start and stop recording. Adjust settings for resolution and frame rate in the video menu.
Visit the official Casio website to download the latest firmware update. Follow the provided instructions to transfer the update to your camera via a memory card and complete the firmware upgrade process.