Canon VIXIA HF R40 v2 Instruction Manual

PUB. DIM-1063-000

English

Franais

Espaol

HD Camcorder

Quick Guide

Camscope HD

Guide rapide

Videocmara HD

Gua breve

6 4

CO PY

2

Important Usage Instructions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.

The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident.

CAUTION: Danger of explosion if the wrong type of batteries are attached. Use only the same type of

batteries. Do not expose batteries or product to excessive heat such as the inside of a car under

direct sunlight, fire, etc.

While using the compact power adapter, do not wrap it or cover it with a piece of cloth, and do not place it in confined narrow spaces.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CO PY

3

E n

Fr E

s

FCC/IC NOTICE HD Camcorder, VIXIA HF R42 / VIXIA HF R40 / VIXIA HF R400 systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Model ID0019 (including WLAN Module Model WM217, FCC ID: AZD217)

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low-power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This model has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

Canon U.S.A., Inc. One Canon Park, Melville, NY 11747, USA Tel No. 1-800-OK-CANON (1-800-652-2666)

This Class B digital apparatus complies with Canadian ICES-003.

CO PY

4

In these safety instructions the word apparatus refers to the Canon HD Camcorder VIXIA HF R42 / VIXIA HF R40 / VIXIA HF R400 and all its accessories.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

9 Only use attachments/accessories specified by the manufacturer.

10 Unplug this apparatus during lightning storms or when unused for long periods of time.

11 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

CA-110 identification plate is located on the bottom.CO PY

5

E n

Fr E

s

Precautions About the Battery Pack DANGER! Treat the battery pack with care. Keep it away from fire (or it might explode).

Do not expose the battery pack to temperature higher than 60 C (140 F). Do not leave it near a heater or inside a car in hot weather.

Do not try to disassemble or modify it.

Do not drop it or subject it to shocks.

Do not get it wet.

REGIONS OF USE VIXIA HF R42 and VIXIA HF R40 are in compliance (as of January 2013) with the radio signal regulations of the regions listed below. For details on other regions where they can be used, make inquiries with the contacts listed on the back side of this instruction manual.

Important Note About the Memory Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent data loss or damage to the memory. - Do not open the memory card slot cover. - Do not disconnect the camcorders power source or turn off the

camcorder. - Do not change the camcorders operating mode.

REGIONS

Canada, Hong Kong S.A.R., USA, South Korea, Taiwan

Model ID0019: VIXIA HF R40 / VIXIA HF R42 CO

PY

6

Trademark Acknowledgements SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries. App Store, iPad, iPhone, iTunes and Mac OS are trademarks of Apple Inc., registered in the U.S. and other

countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries. AVCHD, AVCHD Progressive and the AVCHD Progressive logo are

trademarks of Panasonic Corporation and Sony Corporation. Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories. Google, Android, Google Play, YouTube are trademarks of Google Inc. Facebook is a registered trademark of Facebook, Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under

license. The Twitter name and marks are trademarks of Twitter, Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance. WPS as used on the camcorders settings, onscreen displays and in this manual signifies Wi-Fi Protected

Setup. The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance. Other names and products not mentioned above may be trademarks or registered trademarks of their

respective companies. This device incorporates exFAT technology licensed from Microsoft. Full HD 1080 refers to Canon camcorders compliant with high-definition video

composed of 1,080 vertical pixels (scanning lines). This product is licensed under AT&T patents for the MPEG-4 standard and may be

used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.

CO PY

7

E n

Fr E

s

Package contents

CA-110 Compact Power Adapter* [1]

* CA-110E including power cord, in Asia.

BP-718 Battery Pack

HTC-100/S High Speed HDMI Cable [2]

IFC-300PCU/S USB Cable [3]

6/4 Wi-Fi Basic Setup Guide

Transfer Utility LE Setup Guide

: VIXIA CD-ROM Contains the full-version Instruction Manual of the camcorder (PDF file). See the explanation on next page.

1 2 3

CO PY

8

Table of Contents

07 Package contents

10 Onscreen Icons and Displays

15 Charging the Battery Pack

18 Basic Preparations

19 Using a Memory Card

21 First-time Setup

23 Shooting Video and Taking Photos

27 Playing Back Movies and Viewing Photos

30 Playback on a TV Screen

32 Saving Your Recordings

33 Abridged Specifications

About the Camcorders Wi-Fi Functions (6/4 only) You can enjoy a variety of Wi-Fi functions with your camcorder. While these functions are beyond the scope of this Quick Guide, you can read the Wi-Fi Basic Setup Guide supplied with the camcorder to get you started. And you have the complete information in the full-version Instruction Manual (PDF file*).

About the Camcorders PDF Instruction Manual This guide will get you started and show you how to use the most basic functions of your camcorder to shoot video, take photos and play back your recordings (using the camcorder or connecting it to your TV). To learn more about the more advanced functions of your camcorder, to read important handling precautions and to consult the troubleshooting section if an error message is displayed, be sure to read the full-version Instruction Manual (PDF file*). In this Quick Guide, the ; mark indicates reference page numbers in the PDF file.

* Adobe Reader 6 or later is required to view the PDF Instruction Manual.

CO PY

9

E n

Fr E

s

Installing the Camcorders Instruction Manual (PDF file)

1 Insert the VIXIA CD-ROM into the computers disc drive. The installer panel appears.

2 In the installer panel, click [Instruction Manual of the Camcorder] and select your language.

3 When the installation is complete, click [OK], then [Exit]. The installer will save the camcorders Instruction Manual (PDF file) on the computer and will create a shortcut icon on the desktop for easy access.

CO PY

10

introduction

Onscreen Icons and Displays Recording movies

and modes (with the zoom controls displayed)

1 Control button [PHOTO] - Take a photo (A 23) 2 Smart AUTO* (A 25)

* Available only in mode. 3 Zoom controls (A 23) 4 Total number of scenes / Total recording time 5 Memory operation (; 157) 6 Intelligent IS (; 45) 7 Remaining battery charge

When the battery charge becomes low, replace the battery pack with a fully charged one.

8 Control button [START]: Start recording a movie (A 23) 9 Face detection frame (; 76) Aq Tracking frame: Touch a moving subject on the screen to keep it clearly in

focus at all times. (; 76)

100% 75% 50% 25% 0%

CO PY

Onscreen Icons and Displays

11

E n

Fr E

s

Recording movies

and modes mode

Aa Control button [ ]: Open the (Home) menu (; 35) As Shooting mode: Each of the 5 modes is optimized for a particular subject or

style of shooting. For example, you can use (Baby) mode to easily record movies that track babys growth, or use a special scene mode to apply the camcorder settings most appropriate for a variety of situations. (; 39)

Ad Exposure: Correct the exposure manually for a picture darker/brighter than the one obtained using the automatic exposure set by the camcorder. (; 79)

Af Focus (; 81) Ag Face detection: You can have the camcorder automatically detect peoples

faces and use this information to adjust the focus and set the best exposure and color control settings for beautiful videos and photos. (; 76)

Ah White balance: Change the setting so different lighting conditions do not affect the colors in your recordings and white objects look truly white. (; 83)

Aj Audio level indicator: Manually adjust the audio recording level. (; 87) Ak While recording/during playback: Scene counter (hours : minutes :

seconds); < Self timer (; 84) Al Pre-recording: The camcorder will start recording video 3 seconds before

you press Y, so you do not miss important shooting opportunities. (; 82)

SCN

CO PY

Onscreen Icons and Displays

12

Sq Image stabilizer (; 75) Sa Tele macro (; 86) Ss Movie format (A 21) Sd Remaining recording time

On the memory card; & In the built-in memory* ( Relay recording* (; 63) - When there is no more free space on the memory, [& End] (built-in

memory*) or [ End] (memory card) will be displayed in red and recording will stop. * 6/4 only.

Sf Video quality (A 24) Sg Audio scene (; 87) Sh Control button [ ]: Open the [ Main Functions] panel (; 38) Sj Custom control button (; 152) Sk Fader (; 78) Sl Headphone output (; 89) Dq Control button [FILTER 1] - Cinema-look filters: Use cinema-look filters to

create unique movies with distinctive looks. (; 65) Da Level marker: Display onscreen markers to check your composition and

make sure horizontal or vertical lines do not appear crooked in your recordings. (; 148)

Playing movies (during playback)

Ds Playback control buttons (A 28) Dd Scene playback time

CO PY

Onscreen Icons and Displays

13

E n

Fr E

s

Df Scene number Dg Date/Time (; 148) Dh Volume and background music balance controls (; 52, 96) Dj Decoration: Add a fun personal touch using stamps, drawings, image mix

and more. (; 69)

CO PY

Onscreen Icons and Displays

14

Viewing photos

Dk Control button [Edit] - Open the Edit panel (; 146) Dl Current photo / Total number of photos Fq File number (; 152) Fa Control button [h] - Photo jump (; 55) Fs Control button [] - Slideshow: Play back a slideshow of your photos and

use your favorite background music. (; 100) Fd Control button [f] - Return to the [} Photo Playback] index screen

(; 54) CO PY

15

E n

Fr E

s

step 1

Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. When you use the compact power adapter, the power of the battery pack will not be consumed. Charge the battery pack before use.

1Connect the compact power adapter.

1 Connect to the adapter (for Asia only). 2 Plug into a power outlet.

2Connect the camcorder. Plug into the DC IN terminal.

3Insert the battery pack.

1 Press softly into the battery attachment unit.

2 Slide up until it clicks in place.

2

1

3

CO PY

Charging the Battery Pack

16

Charging will start when the camcorder is turned off.

Charging the supplied BP-718 Battery Pack will take approximately 5 hours 35 minutes. A fully charged battery pack will allow for the following operations (movies in FXP mode).

All given times are approximate and vary according to video quality and charging, recording or playback conditions.

See Charging, Recording and Playback Times (; 181) for details.

IMPORTANT

The battery pack will be charged only when the camcorder is off. Do not connect to the camcorders DC IN terminal or to the compact power

adapter any electrical equipment that is not expressly recommended for use with this camcorder.

Do not connect the supplied compact power adapter to voltage converters or special power sources such as those on aircraft, DC-AC inverters, etc.

Charging times

Typical recording Playback

Memory card 55 min. 2 hr. 35 min.

6/4 Built-in memory

60 min. 2 hr. 35 min.

Indicator off (camcorder turned off)

Red indicator on (charging)

Indicator off (battery pack fully charged)

CO PY

Charging the Battery Pack

17

E n

Fr E

s

NOTES

We recommend charging the battery pack in temperatures between 10 C and 30 C (50 F and 86 F). If either the ambient temperature or the battery packs temperature is outside the range of approx. 0 C to 40 C (32 F to 104 F), charging will not start.

If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed.

Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

CO PY

18

step 2

Basic Preparations Before you begin, make basic adjustments and learn about a few of the frequently-used parts. See Using the Grip Belt (; 24), Opening the Lens Cover and Adjusting the LCD Screen (; 25) for details. See Handling Precautions (; 174), Cleaning (; 178) for important information about how to take care of the touch screen.

1Fasten the grip belt. Adjust it so you can reach the zoom

lever with your index finger, and Y with your thumb.

2Turn on the camcorder and adjust the LCD panel.

1 When you open the LCD panel, the camcorder will turn on and the initial setup screen will appear. Perform the setup after you adjust the LCD panels angle and, if necessary, insert a memory card.

2 Rotate it up to 90 degrees down (for example, to record with your hand extended above a crowd).

3 Rotate it up to 180 degrees toward the lens (for example, to record video of yourself).

3Become familiar with the touch screen. In addition to touching buttons to

select items, you can also drag your finger across the screen for operations such as scrolling menus. While touching the screen, swipe your finger across the screen.

1

2

3

CO PY

19

E n

Fr E

s

step 3

Using a Memory Card Use commercially available . SD, / SDHC (SD High Capacity) or 0 SDXC (SD eXtended Capacity) memory cards. Make sure you use a compatible memory card. See Memory Cards Compatible for Use with the Camcorder (; 27) for memory cards that can be used.

1Turn off the camcorder. If the camcorder is on, press

. Make sure the indicator is off.

2Open the memory card slot cover.

3Insert the memory card at a slight angle all the way into the memory card slot until it clicks. Then, close the memory card slot cover.

1 Push the memory card into the memory card slot. The memory card slot is at a slight angle toward the lens so be careful not to damage the memory card when inserting it.

2 Securely close the cover. Do not force it closed if the memory card is not correctly inserted.

1

2

The label of the memory card facing the lens

click!

Lens

Memory card Top view

CO PY

Using a Memory Card

20

IMPORTANT

Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder.

For important information regarding the use of SDXC memory cards be sure to refer to SDXC Memory Cards (; 27).

Initialize memory cards when you use them with this camcorder for the first time.

See Initializing the Memory (; 33) for details.

NOTES

To remove the memory card: Push the memory card once to release it. When the memory card springs out, pull it all the way out.

CO PY

21

E n

Fr E

s

step 4

First-time Setup When you turn on the camcorder for the first time, you will need to set a few important settings, which the camcorder will guide you through. You can also change these settings later by touching the [ ] control button that appears on the upper left of the screen after you finish this setup.

1Touch the language used for onscreen displays and then touch []. After you select a language, the

[Date Format] screen will appear.

2Select your preferred date/time format and then touch []. After you select the date format, the

[Date/Time] screen will appear with the first field selected.

3Change the date/time.

1 Touch a field you want to change. 2 Touch [] or [] to change the field. 3 Touch to use 24-hour clock. 4 When finished, touch [OK] and then

[]. Next, the [Movie Format] screen will appear.

4Select the movie format.

1 Select [] to record movies with fantastic picture quality. Select [] if you plan on uploading your movies to the Web or transferring them to other devices. Next, touch [].

2 6/4 After you select the movie format, the [v Rec Media for Movies] screen will appear, where you

CO PY

First-time Setup

22

can select the memory to which you want to record movies.

3 7 Skip to step 7.

5Touch [&] (built-in memory) or [ ] (memory card) and then touch []. After you select the memory to which

you want to record movies, the [{ Rec Media for Photos] screen will appear.

6Touch [&] (built-in memory) or [ ] (memory card) and then touch [].

7Touch [OK].

Setup is complete. The settings you selected will appear briefly and then the camcorder will be ready to record. CO PY

23

E n

Fr E

s

basic recording

Shooting Video and Taking Photos In mode you can easily record movies and photos. You do not need to worry about any settings or menu options - the camcorder will select the most appropriate settings automatically.

1Open the lens cover. Before you start recording, open the lens cover. Move the lens

cover switch down to .

2Start recording movies. Press to start recording. Press again to pause the recording and

record the video on the memory as one scene.

3Take a photo. Touch [PHOTO] on the screen.

Use the zoom lever or the onscreen zoom controls. To zoom out, zoom toward the T (wide angle) end. To zoom in, zoom toward the S (telephoto) end.

1

3 2

Flashes in red while shooting video and while a scene or photo is being recorded on the memory.

START/STOP button

[PHOTO]

Using the Zoom to Frame the Subject

CO PY

Shooting Video and Taking Photos

24

After you choose to record movies in MP4 or AVCHD, you can set the video quality. Changing the recording mode will change the recording time available on the memory. For AVCHD movies, select 60P or MXP for better quality or LP for longer recording times. For MP4 movies, select 35 Mbps or 24 Mbps for better quality or 4 Mbps for smaller file sizes and quicker uploads.

See Selecting the Video Quality (; 60) for approximate recording times.

You can use your smartphone to remotely control the camcorder. While you view the camcorders image on the smartphones screen, you can record movies. See Recording Movies Using a Smartphone as a Remote Control (; 125) for details.

Selecting the Video Quality

Touch > [ZOOM] to display the onscreen zoom controls

6/4 Using Wi-Fi to Record Movies with Your Smartphone

> [ Recording Setup] > [Video Quality] > Desired video quality > [X]

CO PY

Shooting Video and Taking Photos

25

E n

Fr E

s

NOTES

Baby mode: In mode, the camcorder will optimize various settings so that recording babys precious moments is effortless. You can even add stamps to the video that will track babys growth. Playback is also simple. All the movies are conveniently saved in the baby album chronologically.

See Baby Mode (; 64) and Playing Back Scenes in the Baby Album (; 93) for details.

Smart AUTO: In mode, just point the camcorder and Smart AUTO will automatically select the best settings for your subject and the scene you want to use. One of 38 icons will appear depending on the characteristics of the subject, background, lighting conditions, etc.

See About the Smart AUTO function (; 43) for details.

Intelligent IS: In mode, the camcorder will automatically select the best IS setting for the situation.

See Intelligent IS (; 45) for details.

Use , , or mode to access the menus and to change various settings up to your preferences. In mode, you have limited access to menus.

See the chapter Advanced Shooting (; 60) for details.

The camcorder features 32x optical zoom. When recording movies, you can also use the 53x advanced zoom and 1060x digital zoom.

See Zooming (; 47) for details.

About the zoom speed: - Onscreen zoom controls: depends on where you touch within the zoom

control. - Zoom lever: variable speed. That is, the zoom speed depends on how

you press the lever: press gently for slower zooms; press harder for faster zooms. You can also change the zoom speed to one of three constant speeds.

See Zooming (; 47) for details.

SCN CO PY

Shooting Video and Taking Photos

26

In most situations, keep at least 1m (3.3 ft.) away from the subject. Using the tele macro function you can reduce this distance to 50 cm (1.6 ft.) at full telephoto. The minimum focusing distance at full wide angle is 1 cm.

See Tele Macro (; 86) for details.

Make sure the camcorder has finished writing the scenes or photos on the memory before turning it off.

1 Check that the indicator is off. 2 Close the LCD panel. 3 Close the lens cover.

When you have finished recording

Confirm that the indicator goes out

CO PY

27

E n

Fr E

s

basic playback

Playing Back Movies and Viewing Photos Your recordings are conveniently organized in different index screens for AVCHD movies, MP4 movies and photos. You can change the index screen and easily find the recording you want to play back.

See Playing Back Video (; 50) and Viewing Photos (; 54) for details.

1Press to set the camcorder to playback mode.

2Change the index screen, if necessary.

Movies: Touch the index screen button ([& ]* or [ ]**) to open the index selection screen. Next, touch the icon that indicates the memory with the desired scene* (& or ) and the movie format of the desired scene ( or ). Then, touch [OK].

2

3

1

Index screen button

(next to [ ])

CO PY

Playing Back Movies and Viewing Photos

28

Photos: Touch [ ] and then touch [} Photo Playback].

3Look for the scene or photo you want to play back.

Drag your finger left or right for the next/previous index page.

4Touch the desired scene or photo to play back.

Movies: The selected scene is played back. Playback continues until the end of the last scene in the index screen. Touch the screen during playback to display the playback controls.

For movies in the built-in memory (&) or memory card ( ) *

* 6/4 only. **7 only.

For the AVCHD () or MP4 () index screen (; 50)

3

1

2

3

4

6

5

7

CO PY

Playing Back Movies and Viewing Photos

29

E n

Fr E

s

1 Touch anywhere else to hide the playback controls 2 Next scene 3 Fast playback* (touch again to increase the speed) 4 Stop 5 Volume and background music controls 6 Pause (touch again to resume playback) 7 Beginning of the scene (double-tap to jump to the previous scene) * In playback pause, these controls are replaced by the slow playback controls.

Photos: The selected photo is displayed in single photo view. Drag your finger left/right to browse through the photos one by one. Touch the screen to display the playback controls.

You can wirelessly share and view your recordings on the Web, view the camcorders recordings from a smartphones Web browser, and more. See Wi-Fi Functions (; 122) for details.

IMPORTANT

You may not be able to play back with another device the movies you recorded on the memory card with this camcorder. In such case, play back the movies on the memory card using this camcorder.

NOTES

When playing back movies, depending on the recording conditions, you may notice brief stops in video or sound playback between scenes.

6/4 Using Wi-Fi to Share and View Recordings

CO PY

30

basic playback

Playback on a TV Screen Connect your camcorder to a TV to enjoy your recordings with family and friends. Make sure the camcorder and TV are turned off before you start.

1Connect the camcorder to the TV. Select the appropriate connection according to the input terminals

on your TV. The HDMI connection has higher picture quality (HD) than the composite video connection (SD).

2Turn on the TV and then the camcorder.

Press to turn on the camcorder directly in playback mode.

3Play back your movies or photos as described in the previous pages.

2

1

! HDMI connection: All digital, high-definition connection; output only.

See Connection Diagrams - Connection ! (; 103) for details about additional settings.

HTC-100/S High Speed HDMI Cable (supplied)(HDMI mini-

connector) (standard HDMI

connector)

CO PY

Playback on a TV Screen

31

E n

Fr E

s

NOTES

The illustrations are for reference only. The layout of terminals on your TV may be different.

We recommend powering the camcorder using the compact power adapter.

Adjust the volume using the TV. When you play back 16:9 movies on standard TV sets with a 4:3 aspect

ratio, the TV set will switch automatically to widescreen mode if it is compatible with the Video ID-1 system. Otherwise, change the aspect ratio of the TV manually.

See [TV Type] (; 149) for details.

" Composite video connection: Analog, standard-definition connection; output only.

See Connection Diagrams - Connection " (; 104) for details about additional settings.

Red

White

Yellow

STV-250N Stereo Video Cable (optional)

CO PY

32

external connections

Saving Your Recordings It is recommended that you periodically save your recordings.

- For AVCHD movies. Refer to the Startup Guide (supplied leaflet) and Software Guide (PDF file) of the supplied PIXELAs software for details about installing and using the software.

- For MP4 movies and photos. This software allows you to save and manage MP4 movies and photos. Refer to Saving MP4 Movies and Photos (Windows/Mac OS) (; 113) for details about installing the software.

- Easily save the whole content of the memory onto an external hard drive connected directly to the camcorder. With no need for a computer, this is a very convenient way to save backup copies of your recordings.

See Memory Save: Saving an Entire Memory onto an External Hard Drive (; 116) for details.

PIXELAs Transfer Utility LE (Windows only)

ImageBrowser EX (Windows/Mac OS)

6/4 Memory Save: Saving Recordings without a Computer

CO PY

33

E n

Fr E

s

specifications

Abridged Specifications The specifications given here are an abridged version of the full specifications of the camcorder. Be sure to read the full version of the instruction manual for the complete information.

See Specifications (; 185) for details.

Power supply (rated) 3.6 V DC (battery pack), 5.3 V DC (compact power adapter)

Power consumption 3.2 W (FXP mode, AF on, LCD normal brightness, memory card)

Canon offers a wide range of optional accessories for your camcorder.

See Optional Accessories (; 181) for details.

Optional Accessories

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.

This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.

CO PY

34

CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon USA) with respect to Canon Consumer Digital Video Equipment (the Equipment) purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase. The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR from the date of original purchase, except for a defective Video Head, which will be exchanged for a period of three months from the date of purchase. Labor: For a period of ONE YEAR from the date of original purchase, labor will be provided free of charge by our factory service centers or designated service facilities located in the United States. When returning Equipment under this warranty, you must pre-pay the shipping charges, and you must enclose the Bill of Sale or other proof of purchase with a complete explanation of the problem. During the ONE-YEAR warranty period, repairs will be made and the Equipment will be return-shipped to you free of charge. For repairs after the warranty period is over, you will be given an estimate of the cost of repair and an opportunity to approve or disapprove of the repair expense before it is incurred. If you approve, repairs will be made and the Equipment will be return-shipped to you. (shipping charges apply). If you disapprove, we will return-ship the equipment at no charge to you. Non-Canon brand peripheral equipment and software which may be distributed with, or factory loaded on, the Equipment, are sold AS IS without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive. Canon USA shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible peripheral equipment and incompatible software. In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the Equipment or call the CANON INFORMATION CENTER AT 1-800-OK-CANON). You will be directed to the nearest service facility for your Equipment. This Limited Warranty covers all defects encountered in normal use of the Equipment and does not apply in the following cases:

A) Loss or damage to the Equipment due to abuse, mishandling, accident, improper maintenance, or failure to follow operating instructions;

B) If the Equipment is defective as a result of leaking batteries, sand, dirt or water damage; C) If defects or damages are caused by the use of unauthorized parts or by service other than by Canon

USAs factory service centers or authorized service facilities; D) If the Equipment is used for commercial or industrial use.

This Limited Warranty does not cover cabinet (exterior finish), video cassette tape, head cleanings, nor does it apply to Equipment purchased outside the United States. This warranty does not cover units sold to rental firms, military operations, hotels, schools, hospitals or for other commercial, industrial, or institutional applications. These uses are covered only by such specific warranty as Canon may issue with such sales. This Limited Warranty does not apply to accessories or consumables for the Equipment, which are sold AS IS, without warranty of any kind by Canon USA. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card is most important in order to be sure you are contacted right away should there be a safety inspection, modification or product recall under applicable laws or regulations.

USA

CO PY

35

E n

Fr E

s

NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS EQUIPMENT SHALL BIND THE UNDERSIGNED (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENTS HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA. (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. CANON U.S.A., INC.

CO PY

36

CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (Canon Canada) with respect to Canon Consumer Digital Video Equipment (the Equipment) purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required. The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canadas option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from:

i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual;

ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems;

iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper);

(b) Any serial number on the video equipment is altered or removed. (c) The Equipment is used for commercial, professional or industrial purposes. This limited warranty does not cover the cabinet (exterior finish) of the Equipment, media, nor does it apply to Equipment purchased outside Canada. If the Equipment contains a hard disk drive, Canon Canada recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of a failure or other malfunction of such drive.

TO OBTAIN WARRANTY SERVICE Ship your Equipment in its original carton, box or equivalent, properly packed, fully insured with shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of the Canon Service Facilities in Canada.

LIMITATIO