Canon EF-S55-250mm f 4-5.6 IS II Instruction Manual
![Canon EF-S55-250mm f 4-5.6 IS II manual cover](/images/zzxUUAOSTuQgqsvmXAgsNgqW/thumbs/thumb175x175.webp)
To attach the lens, align the white square on the lens with the white square on the camera body. Insert the lens into the mount and rotate it clockwise until it clicks into place.
Use a blower to remove loose dust, then gently wipe the lens with a microfiber cloth. For smudges, apply a small amount of lens cleaning solution to the cloth, not directly on the lens.
Ensure the AF/MF switch on the lens is set to AF. Clean the contacts on the lens and camera body. Try resetting the camera settings or updating the camera firmware.
Use a fast shutter speed (at least 1/500s), set the camera to AI Servo AF mode, and select a continuous shooting mode. Adjust the ISO and aperture to ensure proper exposure.
Attach a lens hood to minimize lens flare. Avoid shooting directly into strong light sources, and consider adjusting your shooting angle.
Store the lens with both front and rear caps on in a dry, dust-free environment. Consider using a padded camera bag or lens case for added protection.
Yes, you can use filters with this lens. The filter thread size for the Canon EF-S55-250mm f/4-5.6 IS II Lens is 58mm.
Ensure the IS switch on the lens is turned on. Check the battery level of the camera, as low power can affect IS performance. If issues persist, consult Canon support.
Use a wide aperture (f/4-5.6) and zoom in to the longest focal length (250mm). Position your subject far from the background to enhance the blur effect.
No, the EF-S55-250mm f/4-5.6 IS II Lens is designed for APS-C sensor Canon cameras and is not compatible with full-frame models.