Canon EF-M18-55mm f 3.5-5.6 IS STM Instruction Manual

Align the white dot on the lens with the white dot on the camera's lens mount. Gently insert the lens into the mount and rotate it clockwise until it clicks into place, indicating it's securely attached.
Ensure that the lens is set to AF mode. Check if the camera's settings allow autofocus. Clean the lens contacts with a microfiber cloth to ensure a proper connection between the camera and the lens.
Image stabilization is automatically enabled when the lens is attached to a compatible camera. Ensure that your camera settings do not disable image stabilization.
Store the lens in a dry and dust-free environment. Use a lens cap to protect the front element. Clean the lens with a microfiber cloth and lens cleaning solution when necessary.
Check if the lens is set to manual focus inadvertently. Ensure that the shutter speed is not too slow, which can cause motion blur. Verify that the camera's focus settings are correct.
Rotate the zoom ring on the lens barrel. This will change the focal length, allowing you to zoom in or out on your subject.
Yes, the lens has a 52mm filter thread, allowing you to attach various filters such as UV, polarizing, or ND filters.
The STM motor is generally quiet, but if you hear noise, check if the lens is properly mounted. Noise could also result from internal mechanisms, which may require professional cleaning or servicing.
Use a blower to remove dust particles. Then, gently wipe the lens with a microfiber cloth using circular motions. For stubborn spots, apply a small amount of lens cleaning solution to the cloth before wiping.
Yes, switch the focus mode on the lens to MF (manual focus) and rotate the focus ring on the lens barrel to achieve the desired focus.