Bush WO268 Instruction Manual
![Bush WO268 Radio manual cover](/images/kzMFUFErgJsgznOjAfJhUiBX/thumbs/thumb175x175.webp)
To set the time, press and hold the 'Time Set' button until the hour digits flash. Use the tuning dial to set the correct hour, then press 'Time Set' again to adjust the minutes.
Ensure the radio is plugged into a working outlet. Check the power cord for damage. If using batteries, verify that they are inserted correctly and have charge.
Extend the antenna fully and adjust its position. Moving the radio closer to a window may also improve reception. Avoid placing the radio near devices that generate interference.
Yes, you can connect your smartphone via the auxiliary input using a standard 3.5mm audio cable.
To perform a factory reset, press and hold the 'Reset' button located at the back of the unit for 10 seconds. This will restore all settings to default.
Use a soft, dry cloth to clean the exterior of the radio. Avoid using water or cleaning solutions, as they may damage the radio.
Tune to the desired station, then press and hold one of the preset buttons until you hear a beep, indicating the station has been saved.
The flickering could be due to a power supply issue. Ensure the power cord is securely connected. If the problem persists, consider using batteries or trying a different outlet.
To disable the alarm, press the 'Alarm Set' button and navigate to the alarm settings. Set the alarm time to 00:00, or toggle the alarm switch to 'Off'.
Check if the volume is set too high, which can cause distortion. Ensure the radio is set to an optimal frequency and that the antenna is properly positioned.