Bush 2393289 Instruction Manual
![Bush 2393289 Radio manual cover](/images/GspqqHgHmHnUzLjLjdVLFNTV/thumbs/thumb175x175.webp)
To set the time, press and hold the 'Clock' button until the display starts flashing. Use the 'Tuning' dial to adjust the hours, then press the 'Clock' button again to switch to minutes. Once set, press the 'Clock' button to confirm.
Ensure that the radio is plugged into a working power outlet. Check the power cord for any visible damage. If using batteries, make sure they are inserted correctly and have sufficient charge.
For better reception, extend the antenna fully and adjust its position. You can also try moving the radio closer to a window or away from electronic devices that may cause interference.
Tune to the desired station using the 'Tuning' dial. Press and hold one of the preset buttons (1-5) until you hear a beep, indicating the station has been saved to that button.
First, check if the volume is turned up and not muted. Ensure headphones are not plugged into the headphone jack. If using external speakers, verify they are connected correctly.
Use the 'Band' button on the radio to toggle between AM and FM bands. The display will indicate the current selection.
The radio uses 4 AA batteries. Ensure they are inserted according to the polarity markings in the battery compartment.
To perform a factory reset, unplug the radio, then press and hold the 'Power' button while plugging it back in. Release the button once the display shows 'RESET'.
The 'Err' message usually indicates a tuning error. Try manually tuning to a different frequency and ensure the antenna is properly extended for optimal reception.
Yes, you can connect your phone using an auxiliary cable by plugging it into the 'AUX IN' port on the radio. Switch the radio to 'AUX' mode to play music from your phone.