Bush WMSAE1016W 9305184 Instruction Manual

To reset the Bush WMSAE1016W washing machine, unplug the machine from the power source for about 5 minutes, then plug it back in. This should reset the machine and clear any minor electronic glitches.
If the machine does not drain, check the drain hose for any kinks or blockages. Also, ensure the pump filter is clean by accessing it through the bottom front panel. Clean out any debris to ensure proper drainage.
Remove the detergent dispenser drawer by pulling it out and pressing the release button. Wash it thoroughly under warm water to remove any detergent residue. Dry it completely before reinserting it into the machine.
Excessive vibration can be due to an unbalanced load. Ensure the laundry is evenly distributed. Also, check that the machine is level by adjusting its feet.
The E20 error code indicates a drainage issue. Check the drain pump and hoses for any blockages or kinks. Ensure the pump filter is clean and free from obstructions.
Regular maintenance should be performed every 3 to 6 months. This includes cleaning the detergent drawer, inspecting hoses for wear, and running a drum cleaning cycle.
Yes, the machine has a dedicated wool program designed to gently wash wool garments. Always follow the garment care label instructions and use a detergent suitable for wool.
If the door remains locked, it may be due to a malfunction or the machine still detecting water inside. Wait a few minutes, then try opening it again. If it still won't open, unplug the machine for a brief period and then try again.
To prevent odors, regularly clean the drum and door seal with a mixture of vinegar and baking soda. Allow the door to remain slightly open after each wash to allow moisture to escape.
If clothes are still wet, ensure the spin speed is set appropriately for the load type. Check that the machine is not overloaded, which can prevent effective spinning.