Bush WDSAE86B 9327801 Instruction Manual
![Bush WDSAE86B 9327801 Washing Machine manual cover](/images/DgouVYdQpCqVaIDZMDpjHNEf/thumbs/thumb175x175.webp)
To reset the Bush WDSAE86B washing machine, turn off the device, unplug it from the power source, wait for a few minutes, then plug it back in and turn on the machine.
Check the drain hose for blockages and ensure it is not kinked. Also, inspect the filter for clogs and clean it if necessary.
Remove the detergent drawer by pulling it out and pressing the release lever. Clean it with warm water and a brush, then replace it securely.
Ensure that the washing machine is level and that the load is balanced. Check for any loose objects in the drum and inspect the bearings for wear.
It is recommended to clean the drum and detergent drawer every month, check and clean the filter every two months, and inspect hoses for leaks or wear every six months.
Use the appropriate amount of detergent, do not overload the machine, and select the right wash program for the fabric type.
Refer to the user manual for the specific error code description and follow the recommended troubleshooting steps. If the issue persists, contact customer support.
Leave the door open after each wash to allow the interior to dry, regularly clean the rubber seal, and run a monthly maintenance wash with a washing machine cleaner.
Ensure the machine is level by adjusting the feet, check that the load is balanced, and remove any objects that may be causing the vibration.
Distribute clothes evenly around the drum, avoid overloading, and mix different types of fabrics to help balance the load.