Bush V7SDS Instruction Manual
![Bush V7SDS Dryer manual cover](/images/xraOawXThqqNNNrwYQUnuCiE/thumbs/thumb175x175.webp)
To start a drying cycle, load your clothes into the dryer, select the desired drying program using the control knob, and press the start button.
Ensure the dryer is plugged in and the circuit breaker is not tripped. Check the door is fully closed and the start button is being pressed firmly.
Remove the lint filter from its compartment, located at the front of the drum. Use your fingers or a vacuum cleaner to remove the lint, then replace the filter securely.
Check if the heating element is faulty or if the thermal fuse has blown. Also, ensure that the selected program includes heat.
Unplug the dryer from the electrical outlet, wait for about 5 minutes, then plug it back in to reset the system.
Regularly clean the lint filter, check and clean the vent system, and inspect the drum seals for wear. Consider professional servicing annually.
Use sensor drying programs that automatically adjust drying time based on moisture levels, and avoid setting excessive drying times.
Check for any loose items in the drum, ensure the dryer is level on the floor, and inspect the drum rollers for wear.
Refer to the user manual for specific error code meanings. Generally, unplugging the dryer and plugging it back in can clear minor errors.
Yes, the dryer can be stacked on a compatible washing machine using a stacking kit to ensure stability and safety.