Bush V6SDB Instruction Manual
![Bush V6SDB Dryer manual cover](/images/INZNNNJtzhERFZtsPkhYWGNh/thumbs/thumb175x175.webp)
To start a drying cycle, load your clothes into the drum, close the door securely, select the desired drying program using the program selector knob, and press the start button.
Check if the dryer is plugged in properly and the outlet is working. Ensure the door is closed securely. If the problem persists, inspect the fuse or circuit breaker.
Locate the lint filter, usually at the front of the dryer opening. Gently pull it out, remove lint by hand or with a brush, and reinsert it securely before using the dryer again.
Unusual noises could indicate an unbalanced load, foreign objects in the drum, or worn drum rollers. Check for these issues and redistribute the load or contact a technician if necessary.
It's recommended to clean the exhaust vent at least once a year to ensure efficient operation and to prevent fire hazards.
If the dryer isn't heating, check if the program selected is a heat cycle. Inspect the thermal fuse, thermostat, and heating element for faults. Contact a professional if needed.
Yes, select a gentle or delicate cycle appropriate for fragile fabrics to prevent damage. Always refer to the garment care labels before drying.
Use lower heat settings and remove clothes promptly after the cycle ends. Consider air drying delicate fabrics that are prone to shrinking.
Regularly clean the lint filter, check the drum for foreign objects, clean the exhaust vent annually, and inspect the power cord for wear or damage.
To reset the dryer, unplug it from the power outlet, wait a few minutes, and then plug it back in. Select your desired program and start the dryer.