Bush PHK-WO251 Instruction Manual

To set up your Bush PHK-WO251 Radio, plug the device into a power source and extend the antenna. Turn on the radio using the power button and use the tuning dial to select your desired frequency. Adjust the volume to your preference.
If your radio is not turning on, first ensure it is properly plugged into a working power outlet. Check the power cable for any visible damage. If the problem persists, try replacing the fuse in the plug.
To improve reception, fully extend the antenna and reposition it for the best signal. Avoid placing the radio near electronic devices that may cause interference.
Clean the exterior of your radio with a soft, dry cloth. Avoid using any harsh chemicals or abrasive materials. Ensure the antenna is retracted when not in use to prevent damage.
Yes, you can connect external speakers using the headphone or line-out jack. Ensure the speakers are compatible and properly connected for optimal sound quality.
Check the volume level and reduce it if it's too high. Ensure the radio is tuned to a clear station and that the antenna is properly positioned. If distortion persists, examine the speaker for damage.
To store preset stations, tune to the desired frequency and press the preset button. Hold it until you hear a beep or see a confirmation on the display. Repeat for other stations.
The Bush PHK-WO251 Radio requires an AC power source. Ensure the voltage matches the specifications listed in the user manual to prevent damage.
To reset the radio, locate the reset button, usually found on the bottom or back of the unit. Use a small, pointed object to press and hold the button for a few seconds until the radio restarts.
Ensure the volume is turned up and the radio is tuned to a station with a strong signal. Check if headphones are plugged in, which may mute the speakers. Inspect the speaker connections for issues.