Bush MFC100-U1401 9401789 Service Manual
![Bush MFC100-U1401 9401789 Washing Machine manual cover](/images/lumuexXDBKENHPXnqDtLtqVy/thumbs/thumb175x175.webp)
Ensure clothes are evenly distributed around the drum, avoiding overloading. Leave a hand's width of space at the top for optimal washing and spinning performance.
Check if the machine is plugged in properly, the door is closed, and the water supply is turned on. Ensure the program is selected and the Start button is pressed.
Remove the detergent drawer by pulling it out and pressing the release button. Wash it under warm water to remove any residue before reinserting it.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly, and ensure the water inlet hose is not kinked or clogged.
Ensure the machine is level, and adjust the feet if necessary. Verify that the clothes are evenly distributed and the load is not too small or too large.
Check the drain hose for kinks or blockages and ensure the filter is clean. If the problem persists, inspect the drain pump for obstructions.
Leave the door and detergent drawer open after use to allow the interior to dry. Regularly clean the door seal and run a hot wash cycle with a machine cleaner monthly.
Turn off the machine and unplug it for a few minutes. Plug it back in and restart the cycle. Refer to the manual for specific error code solutions if needed.
Inspect the door seal for damage, check the water inlet and drain hoses for leaks, and ensure the detergent drawer is not overfilled.
Refer to the control panel to choose the desired wash program based on fabric type and soil level. Use the manual for guidance on each program's specifics.